Welcome aboard. Happy Jeeping!
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 2005 CRD Stock http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=43&t=50439 |
Page 1 of 1 |
| Author: | MarkSteele [ Mon Feb 22, 2010 4:35 pm ] |
| Post subject: | 2005 CRD Stock |
Hello all, bought mine after a trip to UK and having one as a rental in 2007. Mine is set up w/the tow package, have had very few probs w/the jeep. I do "always" have issues w/the tranni reseting itself after I tow, or make my anual trip to Kamloops/Sun Peaks in British Columbia. Three mountains passes in about 3 hours. Seems to confuse the darn thing. Then It just does not want to shift. Most recent codes of P0715 and P0700. I usually just drive moderately for a few days and the system corrects itself. I am certain this is all electrical rather than mechanical. Makes me crazy. Any thoughts? |
|
| Author: | STINGN [ Mon Feb 22, 2010 8:06 pm ] |
| Post subject: | Re: 2005 CRD Stock |
Welcome! |
|
| Author: | wecwbe [ Mon Feb 22, 2010 9:51 pm ] |
| Post subject: | Re: 2005 CRD Stock |
Welcome aboard. Happy Jeeping!
|
|
| Author: | democedes [ Tue Feb 23, 2010 9:37 pm ] |
| Post subject: | Re: 2005 CRD Stock |
Welcome! |
|
| Author: | JeepinJarhead03 [ Wed Feb 24, 2010 6:48 am ] |
| Post subject: | Re: 2005 CRD Stock |
Welcome Mark! Be sure to post those codes in the crd or general section, the CRD guys may not frequent this area as quickly as you may wish to figure out the issues! |
|
| Author: | linewarbr [ Wed Feb 24, 2010 5:53 pm ] |
| Post subject: | Re: 2005 CRD Stock |
Welcome, Mark. Ya, come join us in the "CRD. . . Love That Torque" section. Most CRD'ers rarely leave there. From the DTC (Diagnostic Trouble Code) list in the CRD Tech section: P0700-TCM DTC . P0700-TRANSMISSION CONTROL SYSTEM (MIL REQUEST). P0715-INPUT SPEED SENSOR 1 CIRCUIT Here is the link to the Thread: viewtopic.php?f=98&t=40073 IIRC, the Input Speed sensor is on the exterior of the transmission, near the back on the passenger (starboard) side. You may have a loose wire, or some crud in the connector or something. There are other, more knowledgeable people in the CRD section that could probably offer you more help if you post there, since the tranny on the CRD is specific to that model. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|