Hi,
I have just finished installing OME fog lights to my KJ Sport 2003. The lights work, I followed all the instructions in the box to the letter (I think/hope). Now when I turn the lights on, on the bash board the light for the fog light come on even if I haven't turn the fog light on!! This happens when I turn the position lights on. I guess the light should only come on when you actually turn the fog light on? Any ideas where I have gone wrong? And how I can fix it.
Thank you,
Fil

_________________
CRD 2.5 2003

Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators

Just to be clear:



You can also see that the switch is on the position only setting.

Any help please?

Fil.

_________________
CRD 2.5 2003

Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators

are the fog lights actually on when your fog light switch is not on?

_________________
2009 KK

No they are not, if i put on full beam the light goes off. If i put fog lights on with full bean on the light comes on as it should. It's only on half beam and if i pull the switch on to fog light the lights don't come on.
Any idea what the problem is?

_________________
CRD 2.5 2003

Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators

sry, i'm not sure. if you post this in one of the general kj forums it may get more looks. i dont think this electrical section gets as much traffic as the general ones

_________________
2009 KK

Yeah you got some funky wiring issues.The OEM foglights should only turn on with the park lights or low beams,they must turn off when you click the high beams on.

You tapped into the wrong "positive" line on the switch.
There is a "hot" wire for the dash light, and another for the switch / fuse block.
Generally colors can be red / black or red / orange, and possibly orange / red.

Don't have the wiring specs in front of me, but you want to make sure you've used
the wire for the fuse block. Any of the others will give you the errors you are experiencing.

_________________
Brad
International Man of Mystery, Singer of Sentimental Ballads,
Soldier of Fortune, Guardian of the Holy Hand Grenade of Antioch,
Bass Player Extraordinaire, Keeper of the Eternal Flame
of the Immortals, Master Swordsman, The "5th" Beatle,
Expert Marksman, Stand-up Comedian, Martial Artist,
Jeep owner, and all around swell guy.