It is currently Thu Dec 12, 2024 6:19 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Need tach and other functions for custom build.
PostPosted: Tue Feb 27, 2024 12:18 pm 
Offline
LOST Newbie

Joined: Tue Feb 27, 2024 12:08 pm
Posts: 2
I have an 05 KJ Liberty that I need to get the tachometer off and use in the dash of a swap. Any ideas on how to isolate this function?


Top
 Profile  
 
 Post subject: Re: Need tach and other functions for custom build.
PostPosted: Tue Feb 27, 2024 1:08 pm 
Offline
LOST Member
User avatar

Joined: Fri Aug 07, 2009 7:44 pm
Posts: 379
most of the cluster functions are BUS functions, so you'll either need something that can translate to a pulsed signal, or install something in-line with a coil to generate such a signal.

_________________
2007 Jeep Liberty Sport 4x4 3.7L 6spd
  • MOABs with Goodyear Wrangler All-Terrain Adventure With Kevlar 245/70R16
  • JBA UCA 4.5
  • OME 790/948/90009/N32
  • Western Suburbanite 7'4" plow
  • DetoursUSA Backbone
  • HF 12k# winch
[SIZE="1"]WTB: project liberty near N.NJ. stick shift, 4x4, working motor optional, CHEAP[/SIZE]


Top
 Profile  
 
 Post subject: Re: Need tach and other functions for custom build.
PostPosted: Sun Aug 18, 2024 11:16 am 
Offline
LOST Newbie

Joined: Tue Feb 27, 2024 12:08 pm
Posts: 2
sota wrote:
most of the cluster functions are BUS functions, so you'll either need something that can translate to a pulsed signal, or install something in-line with a coil to generate such a signal.

How would I start about this. I am new and kind of in over my head.


Top
 Profile  
 
 Post subject: Re: Need tach and other functions for custom build.
PostPosted: Sun Aug 18, 2024 9:46 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 7280
Location: Central GA
nick50106 wrote:
sota wrote:
most of the cluster functions are BUS functions, so you'll either need something that can translate to a pulsed signal, or install something in-line with a coil to generate such a signal.

How would I start about this. I am new and kind of in over my head.

eMail Sir Sam on this forum, he is one of the few that I know of who has tackled putting this engine in a different vehicle and tried to make everything work.

memberlist.php?mode=email&u=5303
Image

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com