riptricket wrote:
ok i have had my hella ff75's on for sometime now and am getting ready to add my now received 500's, but i have a couple of questions...
1) will installing a relay for each set, not make the switch hot?
2) if i do install the relay, the one provided has 4 pins, but i only want to use 3 b/c i do not want to hook up the lights to the high beams, so how do i install the provided relay and not use all the pins?
Thanks for the help!!!
1) Not at all. I have 3 sets of them running off 1 switch. The trigger for the relay draws such a low amount of current that you'd need a lot of them to kill the switch.
2) you still need all 4 pins. Wire it exactly as they tell you, except intead of running the wire to the headlight high beams, run that wire to the switch you are using to control them. 1 pin to battery power, 1 pin to ground, 1 pin to the switch, 1 pin to the lights.
_________________
-oooooo- ---Craig, L.O.S.T. #CT068103
/______\ ---
http://jeep.allgris.com
O||||||||O ---'02 Sport 4x4, 5-spd,
[]--------[] ---2.5" BDS lift, 245/75/16 MT/Rs, Moab Rims, Locked and Regeared!
[]_____[] ---The list got to long, go to my web site for more!