LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
EVIC install, KJ sport 2002 http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=45&t=14960 |
Page 1 of 1 |
Author: | jgl.kj [ Tue Nov 28, 2006 9:58 am ] |
Post subject: | EVIC install, KJ sport 2002 |
Hi everyone. I have a 2002 KJ Sport with no OTIS/EVIC console. I wanna install it and I had read a lot about what I need, the best source [/url]http://alucinari.net/jeep/kj/evic_install/[url]. Everything seems to be clear for me except where to connect the BCM side of the harness , if fact this link above affirms that "There are many places in your KJ where you can splice these wires into" but The only clear solution I see is to use the Data Link Connector. I want to now in what other locations can I plug the wires and what kind of connector I would need. I took a look to the Fuse Panel but I didn't see any connection apart for those for the fuses. Thanks. |
Author: | Boi1ermaker [ Tue Nov 28, 2006 6:48 pm ] |
Post subject: | |
There's probably somewhere else you can splice into, but the DLC has to be the easiest. My wires are soldered in the DLC...but that's only because i found this after i installed my evic: http://www.carplugs.com/products.html I haven't actually bought anything from there so i can't anything about their service. |
Author: | CaKJFreedom [ Tue Nov 28, 2006 6:53 pm ] |
Post subject: | |
Hi and welcome to the site. Here's the link he's talking about. (thanks FreedomKJ for writing it a couple years ago) http://alucinari.net/jeep/kj/evic_install/ |
Author: | jgl.kj [ Wed Nov 29, 2006 7:09 am ] |
Post subject: | |
Thanks to both. I have the male ODB2 connector but I would like to know where the EVIC/OTIS is connected when is factory installed, or what other options to acces the PCI bus we have. Great forum !!! (for a great car, of course ![]() |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |