i saw on here that someone used a switch that would allow for some back-up lights to be in an on position, off pos., and a pos. where the lights only come on when wired into the back-up lights

http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=14079

and

http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=16669

_________________
-oooooo- ---Craig, L.O.S.T. #CT068103
/______\ ---http://jeep.allgris.com
O||||||||O ---'02 Sport 4x4, 5-spd,
[]--------[] ---2.5" BDS lift, 245/75/16 MT/Rs, Moab Rims, Locked and Regeared!
[]_____[] ---The list got to long, go to my web site for more!

ok, so it exists... but what is it actually called and where can i get one? any pics of one?

I believe all you would need is a three way switch and wire that in place of the switch that came with your new lights your gonna use.

_________________
LIBERTY or DEATH

2005 Sport with "STUFF"

yup, just a 3 way switch.


1 - INPUT from a wire tapped into the reverse lights
0 - OUTPUT to a relay that powers the lights
1 - INPUT from a ignition power source (On when the car is on)

_________________
-oooooo- ---Craig, L.O.S.T. #CT068103
/______\ ---http://jeep.allgris.com
O||||||||O ---'02 Sport 4x4, 5-spd,
[]--------[] ---2.5" BDS lift, 245/75/16 MT/Rs, Moab Rims, Locked and Regeared!
[]_____[] ---The list got to long, go to my web site for more!