| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Trailer Wire Overhead Console Adapter? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=45&t=16087 |
Page 1 of 1 |
| Author: | jinstall [ Tue Jan 02, 2007 11:24 am ] |
| Post subject: | Trailer Wire Overhead Console Adapter? |
Why do I need this and what is the purpose? #L82207248 |
|
| Author: | jinstall [ Tue Jan 23, 2007 7:50 am ] |
| Post subject: | |
Dang no love? |
|
| Author: | CaKJFreedom [ Tue Jan 23, 2007 6:17 pm ] |
| Post subject: | |
No idea what that is. What are you trying to do and where does it say you need that part to do it? |
|
| Author: | jinstall [ Wed Jan 24, 2007 6:06 am ] |
| Post subject: | |
http://jparts.com/product_info.php?cPat ... dbcdcf9df6 http://jparts.com/product_info.php?cPat ... dbcdcf9df6 |
|
| Author: | Scottie [ Wed Jan 24, 2007 9:48 am ] |
| Post subject: | |
WOW I've just realised all my problems with my overhead console and trip mile just started after getting my towbar fitted. |
|
| Author: | Y-Guy [ Thu Jan 25, 2007 1:02 pm ] |
| Post subject: | |
jinstall - I'm not sure if you got your question answered or not. I am in the process of adding these to my 06. The secondary harness is only needed if you want to install a brake controller. Otherwise the other harness will take care of the 4-pin wiring that doesn't use a brake controller wiring. I've installed a Draw-Tite hitch which was pretty easy, and the 1st wiring harness was a breeze too, however the second one (since I need a brake controller) is going to be a long process. |
|
| Author: | jinstall [ Thu Jan 25, 2007 2:54 pm ] |
| Post subject: | |
I am using the e-spec harness form Jeep and I have run into a few problems. I am just trying to trouble shoot. Thanks. |
|
| Author: | Y-Guy [ Thu Jan 25, 2007 3:05 pm ] |
| Post subject: | |
If I can ask, what issues are you running into? I am about to tackle the install of the 2nd harness for the brake controller on mine. Are you installing this as well? |
|
| Author: | jinstall [ Mon Jan 29, 2007 5:49 am ] |
| Post subject: | |
No my issue is with the turn signals. |
|
| Author: | Weegie5 [ Mon Jan 29, 2007 3:43 pm ] |
| Post subject: | informative How To |
I read this How To last week over on Jeep KJ: http://jeepkj.com/forums/viewtopic.php?t=1691. It's pretty thorough and informative. I don't know that it addresses your turn signal issue specifically, but it has some good info about the second wiring harness. |
|
| Author: | Y-Guy [ Mon Jan 29, 2007 4:42 pm ] |
| Post subject: | |
jinstall - are you hooking up to your trailer to test the light? I had picked up one of those 4-wire LED testers and it showed I had problems. However when I installed the first wiring kit and tested it I had turn signals and brakes but no tail lights. Once I installed the second wiring harness (since I don't have an overhead console) then everything worked. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|