Pending Electrical mods in conjunction with ARB bumper and RL Gecko Roof Basket mods.
Details and pics to come. Get the ARB back from powdercoating soon.
Gecko Roof Basket is being made now, delivery soon I hope
Key items:
1. Adding 100 watt KC's to the ARB w/ water tight connectors and grommetts for the tightest and cleanest install.
2. Re-Doing the Wiring looms of the ARB turnsignals With water tight connectors
3. Re-doing the OEM Fogs from grill and installing in the ARB with water tight connectors
4. relaying power to ARB KC's
5. running relayed power to a pair of 130 watt KC driving lights and a pair of 150 watt KC long range lights and finaly a CB antena cable to service the RL Gecko Roof Basket.
6. conceling the wiring for all including the Gecko for the cleanest possible install. (This is the toughest trick of all and not real sure how to pull it off, YET)
7. maintaining a total black theme and consistant group of mods.
Step one:
Rough wire switches on dash and run wires for Gecko Basket as I wait for ARB and Gecko to arrive. (DONE Pics coming soon)
Step two:
Procure the water tight Delphi Packard connectors, fuse block, wire, switches, relays and all neccessary hardware including lights.
Step three:
LOCATION LOCATION LOCATION of the water tight fuse block and relays. Right now looking to fab a shelf to mount all right under the power block infront of battery. Just enough room to get my hand down there if a fuse ever needs to be change. frees up space for future water bottle re-locaton if needed.
Step four:
Run wires from ARB to the factory looms for turnsignals and OEM fogs using new water tight DP connectors that will facilitate the removal of the ARB if ever decide to winch it. Aslo run wiring for KC 100 watt fog lights from ARB location to fuse and relay blocks.
Step five:
Mount ARB so I have a place to put my beer while I watch my KJ burn from electrical fires (Just kidding) finish front end and all wiring and conceling. Test on unsuspecting drivers.
Step six:
Wait for RL Gecko Roof Basket.
Step seven:
Still waiting.
ARB Pics So Far, Wirinf pics to come as I get neccessary equipment to re-do wiring.
USED ARB before powder coating
Hardware condition
After Powder Coating
Install So Far. Got too dark for post install pics. Looks great.