OK this may sound dumb but before I brake something Help. I have a burned out brake light and I can't figure out how to remove the lense to replace it. Any help will be greatly appreciated.

Thanks.

For the rear corner lights, open the tailgate and there are two torx-head screws (T20 I think) on each light. Remove those, then pull firmly back on the assembly and it pops out.

yeah they are T20s and i used a flat head screw driver to pop them off but u might want to be carefull or put a cloth or something between it and the body.

_________________
cactus green 03 sport 3.7
Rusty's coil lift w/ Rancho RSX shocks & 3 ring clevis
custom skids and rock rails ; Surco roof rack w/ hi lift mounted
pioneer cd/aux with Zune mounted on dash; uniden cb with 4' K40 antenna
xeon lights; grill inserts; black wheels; 245/75/16s MTRs
#1281 http://www.cardomain.com/ride/2967585/1

I used a plastic bottle opener to pop the light cover off. If you slide it in the crease where between the light cover and the metal of the jeep and pry it out directly toward you it pops right out and doesn't break the plastic clip.

_________________
Rock Lizard Sliders
mopar belly
245 Revo's
Frankenlift Premium II