LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

replacing brake light
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=45&t=29409
Page 1 of 1

Author:  Richrail [ Mon Feb 11, 2008 3:10 pm ]
Post subject:  replacing brake light

OK this may sound dumb but before I brake something Help. I have a burned out brake light and I can't figure out how to remove the lense to replace it. Any help will be greatly appreciated.

Thanks. :? :oops: :?:

Author:  corwyyn [ Mon Feb 11, 2008 3:47 pm ]
Post subject: 

For the rear corner lights, open the tailgate and there are two torx-head screws (T20 I think) on each light. Remove those, then pull firmly back on the assembly and it pops out.

Author:  dloc_jeep_KJ [ Mon Feb 11, 2008 6:29 pm ]
Post subject: 

yeah they are T20s and i used a flat head screw driver to pop them off but u might want to be carefull or put a cloth or something between it and the body.

Author:  wheaties [ Mon Feb 25, 2008 5:38 pm ]
Post subject: 

I used a plastic bottle opener to pop the light cover off. If you slide it in the crease where between the light cover and the metal of the jeep and pry it out directly toward you it pops right out and doesn't break the plastic clip.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/