New Ram PC mount

Cacher123 · **Posted:** Thu Nov 10, 2005 2:38 am

http://www.ram-mount.com/laptop_mount/ramvb141sw1_laptop_desk.htm
http://www.ram-mount.com/nodrillsystems/pop/ramvb141adetailweb.pdf
Made just for the Libby

Quote:

Description

RAM Vehicle Laptop Desk Pedestal Assembly for the following vehicles:

Jeep Liberty (2006-NEWER) Did the seat mounts change for 06?

This No-Drill Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough Tray™ is spring loaded to accommodate 10 to 16 inch wide laptops. The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.

Trodo · **Posted:** Fri Nov 11, 2005 1:20 pm

I have several ram mounts, not that one mind you, but they do make a quality product.

Guest · **Posted:** Sun Nov 20, 2005 6:20 pm

What about pics installed int he Libby?
maybe with a laptop open and closed?

Maybe someone has it? .... didn't see any on there site...
Have some RAM stuff myself ... good product!

Mike

Cacher123 · **Posted:** Mon Nov 21, 2005 12:29 am

I have pics of the older mount on my cardomain page w/a laptop installed.
Just stay away from their laptop tray. It's really cumbersome, clunky, has springs and other attachments and is grossly overpriced. For half the price I had a custom piece of black lucite cut, drilled to accept the ram mounting ball and polished the edges. About $30. Two strips of velcro and it holds better than the ram mount and looks alot nicer.

Alerion · **Posted:** Tue Jan 03, 2006 9:46 am

I am a fan of RAM mounts and, as is generally the case, this is a quality unit BUT... I had the opportunity to drive a Liberty with one of these installed over the weekend. From the driver's standpoint it was great. Unfortunately I also had the opportunity to ride in the same vehicle for a couple of hours. This unit, without the diagonal brace in the photo above, still keeps you from using about four inches of the left side of the seat cushion. Uncomfortable in the short term. Painfull in the long run. So I'd give it a qualified thumbs up for a vehicle that doesn't normally carry a front seat passenger. OTOH, if you absolutely need a laptop in your KJ it's probably the best solution out there.

Tom

Cacher123 · **Posted:** Tue Jan 03, 2006 4:59 pm

Mine is the older style, more universal, mount. I believe the newer one is a little more "Low profile" and may take up less room. Luckily, my gf is slim so it really doesn't interfere with her. On the other hand I remove it when she is passenger since she is afraid of what might happen in an accident.

New Ram PC mount

Who is online