speaker install question

Kj Juice · **Joined:** Sat Oct 15, 2005 5:35 pm **Posts:** 62

going to replace my speakers i have some pioneer 3 ways 6 1/2 i take off my driver door and there is some thing attached to my speaker.. my question is do i need this.. cuz there looks like no way to mount this to my new speakers.. if i don't need it.. what wires do i use from it cuz there is a cluster of them? any help

Jeepjeepster · **Posted:** Sun Nov 13, 2005 10:12 pm

thats the amp for the rear speakers and tweeters.

Kj Juice · **Joined:** Sat Oct 15, 2005 5:35 pm **Posts:** 62

ok so i do need it.. then my question is do i have to buy some kind of mounting plate to mount the amp to the new speakers.. cuz it looks like it mounts to the middle of my factory speaker. and doesn't look like i can do the same thing with my new speaker

pixeldzn · **Posted:** Mon Nov 14, 2005 4:36 pm

Kj Juice wrote:

ok so i do need it.. then my question is do i have to buy some kind of mounting plate to mount the amp to the new speakers.. cuz it looks like it mounts to the middle of my factory speaker. and doesn't look like i can do the same thing with my new speaker

If you are using an aftermarked Head Unit, you do not need them.

Kj Juice · **Joined:** Sat Oct 15, 2005 5:35 pm **Posts:** 62

alright. i do have aftermarket head unit.. then once again the question is what wires do i use from the bundle..that goes to the amp..thanks for all your help guys

to add to that is there an easy way to take of the connector to the door handle.. i just don't want to break it

Kj Juice · **Joined:** Sat Oct 15, 2005 5:35 pm **Posts:** 62

Are the wires just the red and black ones? and still need help with the connector rod

speaker install question

Who is online