So if you're one of the many to have rattly speakers, that really get nasty with any song with a half decent bass part, this works.

Refoaming is another option, but this is less $$$ and is easier.

Supplies:
Putty knife (to remove door panel)
Screw driver (philips)
foam (see below)
$3.50 at Home Depot, in the weather striping section, or you can by this stuff, what I used, $35+ shipping here, as it's Nasa Certified, astronautical, vibration dampening matter. It's just like the $3.50 Home Depot stuff, but guaranteed to add 10 HP. :happy175:




So pop off the door panel (one screw in tray, other behind door handle under a cover)

Pry at the base, popping is normal, doesn't mean anything is breaking

Then remove the the 3 screws for the speaker.


And then you get to this part:


Take one strand of it, rip it off. Don't try to fit a lot in. Only put it on the outside of the cone. Tried inside, didn't work as well and it deadened the sound bad.

_________________
05 KJ Limited 4x4 in Light Khaki: Detours USA Backbone, Warn M8000, Huskyliners, RockLizard Super Skink sliders, OME/Bilstein Lift, JBA UCA's, 245/70/17 Nitto Terra Grapplers
07 LR3 SE V8
1996 XJ Country
2015 KL Limited

This is a really bad idea, but a nifty "how to".

_________________
2006 CRD http://www.UtahPowderCoatings.com/ http://www.gorecon.com/ I'm kind of a big deal.
RL rear bumper, ARB front bumper, Mile Marker winch, Power Tank, Skids by Mopar & Skid Row, RL Super Skink Sliders, 235/85R16 MTR, Air Flow Snorkel, DTT, 4.10 gears, Frankenlift II, Katskin leather, JL Audio stereo, Rosen video.