Hi again.
Since a few weeks , the right hand side buttons of my EVIC have no more back light (step and menu) . I took out the bulb and it is a tinny twist / connect plastic piece.
Checked on Mopar parts catalogue, can not find the description or reference.
Anyone knows how , where to get them ?.....

_________________
Silver CRD
ASFIR skid front & central elements, MOPAR gas tank skid - SAMCO Turbo hoses - 4 breathers extension
2006 gaser airbox - Frankenlift with Koni at front.
Airtex lift pump

...wow....am surprised !
No one knows about these tinny bulbs ?
The bulb itself is about 2mm long and it is stuck into a twist/connect plastic that is approx. 4mm....
and no idea where to get them ...

_________________
Silver CRD
ASFIR skid front & central elements, MOPAR gas tank skid - SAMCO Turbo hoses - 4 breathers extension
2006 gaser airbox - Frankenlift with Koni at front.
Airtex lift pump

The DC part# for these bulbs is 04437661

Here you can find great info about jeep bulbs http://www.wjjeeps.com/lamps/lamps.htm

Bulb can be simply remove from plastic base and then you can find it in local electronic store. This method is 10-20 times cheaper.

_________________
'06 Jeep Liberty (EU Cherokee) 2.8 CRD 120kW - SEGR - Fumoto - viscous heater off - Hardi inline lift pump - DrakeBox2 performance chip - EVIC added - HVAC controls modded - inline thermo - SOLD

'09 Jeep Patriot 2.0 CRD

Ok, got it . will try to remove the bulb itself.
Thanks !

_________________
Silver CRD
ASFIR skid front & central elements, MOPAR gas tank skid - SAMCO Turbo hoses - 4 breathers extension
2006 gaser airbox - Frankenlift with Koni at front.
Airtex lift pump