I have a champion winch that I want to add a second switch so I can wrap the cable my self. The switch that is in it is in the cab. It has the solenoid built into it. How can I go about wiring in that switch to line cable on it. It will no have any tension on it while I use that switch. It is wired now with hot and ground off battery and hot and ground from switch to winch. Thanks

_________________
2006 crd
Orm and ehm
Straight pipe and filter box mods
Ome lift with 31x10.50 tires and 15x10 wheels
Bedlined flares and rockers
Tj custom bumper mod
Scorpion diesel tuner

Don't know anything about the Champion Winch, but you should be able to wire a second set the same way the first set is wired.

I have both an in cab switch and a front bumper winch control socket. Here is the thread for my project.

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=16&t=60104&hilit=+winch

_________________
2005 CRD "Ol' Blue"
Red Ryder carbine-action, two hundred shot range model air rifle with a compass in the stock and this thing which tells time.
My build page- RL Komodo Rear and TJM Front Bumper, armored, lifted, JBA Steel D30, 4.10s and ARB air lockers.