| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| How to wire a second switch on my winch http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=45&t=66596 |
Page 1 of 1 |
| Author: | vincennescrd [ Tue Apr 24, 2012 7:54 pm ] |
| Post subject: | How to wire a second switch on my winch |
I have a champion winch that I want to add a second switch so I can wrap the cable my self. The switch that is in it is in the cab. It has the solenoid built into it. How can I go about wiring in that switch to line cable on it. It will no have any tension on it while I use that switch. It is wired now with hot and ground off battery and hot and ground from switch to winch. Thanks |
|
| Author: | bugnout [ Wed Apr 25, 2012 12:41 am ] |
| Post subject: | Re: How to wire a second switch on my winch |
Don't know anything about the Champion Winch, but you should be able to wire a second set the same way the first set is wired. I have both an in cab switch and a front bumper winch control socket. Here is the thread for my project. http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=16&t=60104&hilit=+winch |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|