| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Hi mount brake light wiring?? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=45&t=69103 |
Page 1 of 1 |
| Author: | surfRenegade [ Wed Jun 06, 2012 1:56 pm ] |
| Post subject: | Hi mount brake light wiring?? |
Hey all, I cracked open my hi mount brake light and put some led strips in that say they work on any auto electrical system. I tested the brake light with my pc power adapter and everything is working. When I tap into the vehicle wiring it doesnt work. I put the LED power to red wire and the LED negative to the white wire. Anyone know whats wrong? I tested with a voltmeter and it should work |
|
| Author: | infernicus [ Wed Jun 06, 2012 3:17 pm ] |
| Post subject: | Re: Hi mount brake light wiring?? |
Double check the colors for the positive and negative leads on the LED, sometimes they are reversed. Here is the info from the FSM. CENTER HIGH MOUNTED STOP LAMP - WHITE 2 WAY (connector) CAV 1 - L50 18WT/TN (WHITE/TAN) - FUNCTION - BRAKE LAMP SWITCH OUTPUT CAV 1 - Z309 18BK (BLACK) - FUNCTION - GROUND Hope this helps, good luck!  (Oh, and I would love to see some pics of the process if you have. My whole rear are LEDs, except for the CHMSL Here is what I did - viewtopic.php?f=6&t=64154) |
|
| Author: | surfRenegade [ Wed Jun 06, 2012 5:39 pm ] |
| Post subject: | Re: Hi mount brake light wiring?? |
Thanks! I didnt take pics of the process unfortunately but ill post some pics if i can get it to work |
|
| Author: | surfRenegade [ Wed Jun 06, 2012 5:40 pm ] |
| Post subject: | Re: Hi mount brake light wiring?? |
Those tail lights look great! |
|
| Author: | infernicus [ Wed Jun 06, 2012 5:52 pm ] |
| Post subject: | Re: Hi mount brake light wiring?? |
Thanks! I enjoyed making them, and I love them. I have to make the CHMSL an LED too. I'm curious to see what you have come up with. 
|
|
| Author: | HustlinFlip [ Wed Jun 06, 2012 6:00 pm ] |
| Post subject: | Re: Hi mount brake light wiring?? |
Hey Infernicus, would you be able to tell me which wires do what for the front turn signal and side marker? Trying to get some LED switchbacks in there. |
|
| Author: | surfRenegade [ Wed Jun 06, 2012 7:48 pm ] |
| Post subject: | Re: Hi mount brake light wiring?? |
I am doing those as well. here is a nice diagram http://www.oznium.com/forum/topic15397 |
|
| Author: | infernicus [ Wed Jun 06, 2012 8:08 pm ] |
| Post subject: | Re: Hi mount brake light wiring?? |
Oznium is a great site, I've purchased many a LED from them. HustlinFlip wrote: Hey Infernicus, would you be able to tell me which wires do what for the front turn signal and side marker? Trying to get some LED switchbacks in there. Sorry for the thread jack Surf.. Hopefully this helps..    
|
|
| Author: | HustlinFlip [ Wed Jun 06, 2012 11:27 pm ] |
| Post subject: | Re: Hi mount brake light wiring?? |
Thanks man! (Sorry for threadjacking Surf) |
|
| Author: | surfRenegade [ Thu Jun 07, 2012 5:59 pm ] |
| Post subject: | Re: Hi mount brake light wiring?? |
no worries guys. i will be using that info in the future too  one thing on the brake light wiring. I opened mine again today to take a peek. I have two wires one (white and tan) the other (red). So this doesnt really make sense. Black is ground but I dont have a black |
|
| Author: | infernicus [ Thu Jun 07, 2012 7:09 pm ] |
| Post subject: | Re: Hi mount brake light wiring?? |
***I should make a note that this info is from the 2007 FSM.***** I'd assume the upper brake light would be easy to tap into, especially with two wires, there are only two options, lol. Try one way, and if it doesn't work, try the other, lol. |
|
| Author: | surfRenegade [ Fri Jun 08, 2012 12:06 pm ] |
| Post subject: | Re: Hi mount brake light wiring?? |
infernicus wrote: ***I should make a note that this info is from the 2007 FSM.***** I'd assume the upper brake light would be easy to tap into, especially with two wires, there are only two options, lol. Try one way, and if it doesn't work, try the other, lol. Yeah I thought the same thing, so i tried it each way haha. Didnt work. I hooked it directly to the battery terminals and it works though. I am wondering if niether of those are ground...although that would be strange. |
|
| Author: | infernicus [ Fri Jun 08, 2012 2:20 pm ] |
| Post subject: | Re: Hi mount brake light wiring?? |
Very interesting, lol. If thats the case of neither being a ground, then... I guess, try the positive feed of the LED to the White / Tan And the ground of the LED to another ground. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|