WELCOME!
Here is a step by step with pictures.
I popped it out with a flat head screwdriver.
There is also one on the passenger side in the same location.
http://en.wikibooks.org/wiki/Jeep_Liber ... enetration
ENJOY!
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Running wire through firewall http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=45&t=73029 |
Page 1 of 1 |
| Author: | TheBlueKJ [ Thu Dec 27, 2012 4:05 pm ] |
| Post subject: | Running wire through firewall |
Ok so I've read that there is a spot where you can run wire through the firewall without having to drill through it. I can't seem to find it I've got an 03 and I'm wiring up my new KC's. Just trying to find this spot before I start doing any wiring. Any help is much appreciated. Thanks in advanced |
|
| Author: | infernicus [ Thu Dec 27, 2012 6:17 pm ] |
| Post subject: | Re: Running wire through firewall |
WELCOME! Here is a step by step with pictures. I popped it out with a flat head screwdriver. There is also one on the passenger side in the same location. http://en.wikibooks.org/wiki/Jeep_Liber ... enetration ENJOY!
|
|
| Author: | TheBlueKJ [ Fri Dec 28, 2012 7:13 am ] |
| Post subject: | Re: Running wire through firewall |
Alright thanks for your help! |
|
| Author: | TheJawsOfDeath [ Sun Jan 13, 2013 3:44 pm ] |
| Post subject: | Re: Running wire through firewall |
Thats the spot where I ran the power wire for my amp. Duct taping the end of the wire to a coat hanger made it easy to fish through. |
|
| Author: | TheBlueKJ [ Sun Jan 13, 2013 5:18 pm ] |
| Post subject: | Re: Running wire through firewall |
That's exactly what I did
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|