LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
CB Pa amp question http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=45&t=74148 |
Page 1 of 1 |
Author: | mawlkrawler [ Thu Feb 14, 2013 6:22 pm ] |
Post subject: | CB Pa amp question |
I just ordered a nice 100 watt PA for my cb. Do I need an amp for it? I'm not sure what to look for. Here's the PA ![]() Sent from my iPhone 5 |
Author: | JeepMorrison [ Thu Feb 14, 2013 6:33 pm ] |
Post subject: | Re: CB Pa amp question |
Yes, your pa is driven at max 20watts, so if you want it to be loud you have to get a speaker with a pre amp or another amp. I used a 150 watt rms sub woofer amp from amazon....30 bucks. Sent from my Home Phone using Tapatalk 2 |
Author: | JeepMorrison [ Thu Feb 14, 2013 6:38 pm ] |
Post subject: | Re: CB Pa amp question |
My coworker uses this one....works good and he can even plug in his phone and listen to music at the beach. Sent from my Home Phone using Tapatalk 2 |
Author: | mawlkrawler [ Thu Feb 14, 2013 6:45 pm ] |
Post subject: | CB Pa amp question |
Would this work?? ![]() Sent from my iPhone 5 |
Author: | JeepMorrison [ Thu Feb 14, 2013 7:32 pm ] |
Post subject: | Re: CB Pa amp question |
Yes thats the one he used but wasnt very loud. I guess the link didnt work mines the vr3. Hooked it up like a car amp. Sent from my Home Phone using Tapatalk 2 |
Author: | mawlkrawler [ Fri Feb 15, 2013 12:53 am ] |
Post subject: | CB Pa amp question |
I think I found a better one it's a 100 watt and the reviews are a lot better. Think this will work for what I need? ![]() Sent from my iPhone 5 |
Author: | JeepMorrison [ Fri Feb 15, 2013 3:09 am ] |
Post subject: | Re: CB Pa amp question |
Yea should work, i have the leads coming out of my cb pa output to the input of my amp (not rca) but the old school way. Then a trigger wire and power lines, then wires to the speaker. Pretty easy install. My uses a horn from a stadium that the bell is cut down. Sent from my Home Phone using Tapatalk 2 |
Author: | mawlkrawler [ Fri Feb 15, 2013 1:07 pm ] |
Post subject: | CB Pa amp question |
Ik it's a lot to ask but can u maybe sketch a quick wiring diagram. I know nothing about hooking up audio stuff to an amp Sent from my iPhone 5 |
Author: | JeepMorrison [ Fri Feb 15, 2013 3:32 pm ] |
Post subject: | Re: CB Pa amp question |
Ill draw one up later when i get home....but you need a amp with speaker level inputs. Sent from my Home Phone using Tapatalk 2 |
Author: | mawlkrawler [ Fri Feb 15, 2013 8:32 pm ] |
Post subject: | Re: CB Pa amp question |
4x4kayak2112 wrote: Ill draw one up later when i get home....but you need a amp with speaker level inputs. Sent from my Home Phone using Tapatalk 2 I'm not sure what you mean by an amp with speaker level imputs but the one I posted a picture says it has 2-Channel MOSFET Power Amplifier Remote Subwoofer Level Control Included 100W x 2 Max Power 100W x 2 RMS Power 50W x 2 Max Bridged Power Here is the link. I just want to make sure this thing is what I need before I order it. http://www.amazon.com/gp/product/B004S50ZB2/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=ATVPDKIKX0DER I attempted to draw a modified wiring diagram from the unit's manual. I think I've done it right.....hopefully ![]() ![]() ![]() |
Author: | JeepMorrison [ Fri Feb 15, 2013 10:00 pm ] |
Post subject: | Re: CB Pa amp question |
Yea pretty much, you inputs i used one side, as the cb is mono. But theres a trigger wire that needs to be hooked up too as well as a pos and neg. That trigger turns on the amp. Sent from my Home Phone using Tapatalk 2 |
Author: | mawlkrawler [ Fri Feb 15, 2013 10:09 pm ] |
Post subject: | CB Pa amp question |
What would I connect the trigger wire to? Would I run the (+) wire directly to the batt thru a 10amp fuse and then run the trigger switch to the acc wire on an independent switch? My full wiring diagram looks like this. So basically should I change the PA so only the LEFT is hooked up and as for the (+) on the amp I should attach an inline 10amp fuse and run it to my battery and run a wire from the trigger wire to the acc wire on my independent switch? ![]() Sry If it's hard to read ![]() Sent from my iPhone 5 |
Author: | JeepMorrison [ Sat Feb 16, 2013 12:17 am ] |
Post subject: | Re: CB Pa amp question |
Normally the trigger wire would hook up to your blue wire on the head unit. But in this case hook it up to a ingition or your switch type of 12 v source. Sent from my Home Phone using Tapatalk 2 |
Author: | mawlkrawler [ Sat Feb 16, 2013 1:46 am ] |
Post subject: | CB Pa amp question |
Ok awesome! I think I got everything I needed. I'm going to start this project Wednesday. Ill start a new thread with some pics and a how to Thanks for all your help !!! Sent from my iPhone 5 |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |