| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Wiring toggles to ground lead http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=45&t=80398 |
Page 1 of 1 |
| Author: | Elktalk [ Mon Oct 13, 2014 1:40 pm ] |
| Post subject: | Wiring toggles to ground lead |
I just wanted to ask what the pro's and con's of using a toggle switch to break the ground on a set of lights. This is a quick schematic I did so it may not be accurate. I want to use my high beam switch to close the ground lead and turn on my lights. after that I have a toggle to override the high beam switch so if I want I can turn my lights on with the jeep ignition off. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|