| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Alternative spot for running wires through the firewall. http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=45&t=82730 |
Page 1 of 1 |
| Author: | gottorque [ Thu Jul 30, 2015 9:54 pm ] |
| Post subject: | Alternative spot for running wires through the firewall. |
I do know about the small hole next to the large trunk of main wiring, however I can not pass any more through that as wiring for my Rigid cubes and 2m VHF has taken it up. For you guys with multiple electrical accessories, where did you run yours? I picked up a Daystar firewall boot that I could hopefully use but I didn't see a satisfactory spot to put the 1.25" hole. Hopefully post pictures as well. Thanks! |
|
| Author: | PALiftedKK [ Fri Jul 31, 2015 11:18 pm ] |
| Post subject: | Re: Alternative spot for running wires through the firewall. |
on the drivers side you could drill a hole. just verify there's nothing obstructing the drill bits path. clear coat it or paint the cut metal in the engine bay to further prevent rust. I ran my wires in the factory spare cut out. will need to drill another sometime when I get a switch panel. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|