It is currently Tue Mar 19, 2024 7:17 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Carling Switches/ARB Switches/Rocker Switches etc...
PostPosted: Tue Jan 19, 2016 7:49 am 
Offline
LOST Newbie

Joined: Tue Sep 04, 2007 5:52 am
Posts: 31
Location: Brisbane
Hi all

Just wondering if anyone has tapped into the cluster dimming wires to control the brightness on said installed switches? I know the light output is controlled by a pulse width modulator so was thinking of picking up the signal from the radio wiring loom (I believe it's the Purple wire??) to be able to dim the little LED in the switch. Also best place to ground around that area? Pick up a Ground wire or ground to the chassis somewhere?

Cheers


Top
 Profile  
 
 Post subject: Re: Carling Switches/ARB Switches/Rocker Switches etc...
PostPosted: Tue Jan 19, 2016 4:10 pm 
Offline
LOST Addict

Joined: Fri Nov 07, 2014 9:15 am
Posts: 1439
Location: Pennsylvania
Very interesting idea! It is possible. You can just tap right into the wire that dims the lights. Tap into it and buy a signal amplifier. One exactly like those rgb lights, but amplifier. Not reciever. Good luck.

_________________
2012 Jeep Liberty KK 109k miles and stong
4" lift.
Gen 5.5 A-Arms
Maxxis 31x10.50x15

ATS42rle


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com