| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Carling Switches/ARB Switches/Rocker Switches etc... http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=45&t=83881 |
Page 1 of 1 |
| Author: | Kanvas [ Tue Jan 19, 2016 7:49 am ] |
| Post subject: | Carling Switches/ARB Switches/Rocker Switches etc... |
Hi all Just wondering if anyone has tapped into the cluster dimming wires to control the brightness on said installed switches? I know the light output is controlled by a pulse width modulator so was thinking of picking up the signal from the radio wiring loom (I believe it's the Purple wire??) to be able to dim the little LED in the switch. Also best place to ground around that area? Pick up a Ground wire or ground to the chassis somewhere? Cheers |
|
| Author: | PALiftedKK [ Tue Jan 19, 2016 4:10 pm ] |
| Post subject: | Re: Carling Switches/ARB Switches/Rocker Switches etc... |
Very interesting idea! It is possible. You can just tap right into the wire that dims the lights. Tap into it and buy a signal amplifier. One exactly like those rgb lights, but amplifier. Not reciever. Good luck. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|