2006 Jeep Liberty cb install
Page 1 of 1

Author:  marcos [ Sun Sep 03, 2017 2:54 pm ]
Post subject:  2006 Jeep Liberty cb install

Well, decided to install my cb that I had for over 8 years at home..... I know, I know, I am slow doing things.....

Decided to install it on my Liberty after the lift was done. The installation was done on the cross bars on the roof. Took some pics and did the electrical connections so when the ignition is off, no power goes to the cb. The box was installed under the drivers seat, the ground was put next to the left foot firewall behind the plastic piece. The swr is 1.4 on channel 1 and 1.7 on channel 40 with the 3 feet firestik antenna. Added a tram quick disconnect and tram heavy duty spring. Here are some pics.ImageImageImage[img]https://uploads.tapatalk-cdn.com/

Sent from my iPad using TapatalkImageImageImageImageImage

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group