wildassbill327 wrote:
So here I go again, but this time I'm not going to just plug it in. I need to know how to tell which wire goes to the injector #4 and which goes to the regulator. Someone has to know how to tell.
The
"Fuel Pressure Regulator" on the side of the fuel rail has a three wire connector and is NOT compatible with the #4 injector connector.
The #4 injector only has a two wire connector, one wire is WT/BR (white/brown), the other wire is BR/TN (brown/tan)
The
"Fuel Pressure Solenoid" on the very end of the fuel rail has a two wire connector, one wire is BR/OR (brown/orange), the other wire is a single BR (brown) color.
*Wire colors according to the 2005 FSM (Factory Service Manual, Section 8W- Wiring)
_________________
Supporting Vendor and Moderator of LOST05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount98 Dodge Cummins 24 Valve