Sometime last week while I had the pulley off (while working on my trailer brakes/lights) some a##hole grabbed my crank bolt. I always set it on the wiper-ledge; some kid probably walked by and decided it was a great idea to totally screw a gringo working on their car.

Anyway, obviously it's reverse-threaded but maybe somebody knows the size/length/pitch? Or maybe knows other more-common vehicles that use one that could suffice?

Its Dec 4th: I wont be back to Baja to continue the battle until after 12/20, so if anybody has an extra they'd sell (donate?) I'd be very grateful!
Please lmk.
Aloha

_________________
'15: bought '05 w/138k.
'16: HG/Rockers/ARPs/Thermo/H20pump/TbeltKit/ Seals/ Mounts/Kennedy fuel pump.
'17: bought manual Gas donor for its' ARB F/R Airlockers, OME 2.5" lift (gas-rated), JBA UCAs, ARB bumper.
'19: Trans w/Suncoast/Transgo/HDdiscs, new OME CRD-rated lift, electric tri-fan setup, BlackMagics/Centric Premiums, Airbags.

Whoops: $7.99 & in stock @ ID.
I thought these would be nightmare unobtanium to source; not so much... pardon lameness.

_________________
'15: bought '05 w/138k.
'16: HG/Rockers/ARPs/Thermo/H20pump/TbeltKit/ Seals/ Mounts/Kennedy fuel pump.
'17: bought manual Gas donor for its' ARB F/R Airlockers, OME 2.5" lift (gas-rated), JBA UCAs, ARB bumper.
'19: Trans w/Suncoast/Transgo/HDdiscs, new OME CRD-rated lift, electric tri-fan setup, BlackMagics/Centric Premiums, Airbags.