It is currently Thu Mar 28, 2024 5:10 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 59 posts ]  Go to page Previous  1, 2, 3
Author Message
 Post subject: Re: Head Gasket replacement procedures
PostPosted: Fri Jan 27, 2023 5:53 am 
Offline
LOST Member

Joined: Mon Jul 18, 2016 6:33 am
Posts: 412
Location: Central KY
DieselJeepLuvr wrote:
Posting updates on Facebook because I can't post pictures here. This forum is so old, it's like using dial- up internet. Best of luck.


Just like the CRD KJ huh.

_________________
2005 Liberty CRD, with 135,XXX miles. Rockers, exhaust valves, Provent, EGR block & butterfly delete & V6 air box at 100K

1998 XJ 4.0L, stock with 130,XXX miles

First Jeep: 1962 Willys CJ-3B


Top
 Profile  
 
 Post subject: Re: Head Gasket replacement procedures
PostPosted: Fri Jan 27, 2023 1:39 pm 
Offline
LOST Member

Joined: Sat Jul 10, 2010 7:38 pm
Posts: 421
Location: The Dalles, OR.
Text sent.

_________________
GDE FT Ecotune, EHM, Weeks kit stage 1 & 2, Carter 4600 lift pump, Upgraded tranny, Fishing boat hauler!
New at 164K: head gasket, rockers, exhaust valves, ARP head studs, Injectors, 5v Bosch glow plugs, water pump, timing everything, serpentine everything,
New at 225k: new head, timing belt


Top
 Profile  
 
 Post subject: Re: Head Gasket replacement procedures
PostPosted: Fri Jan 27, 2023 1:41 pm 
Offline
LOST Member

Joined: Sat Jul 10, 2010 7:38 pm
Posts: 421
Location: The Dalles, OR.
krb wrote:

Just like the CRD KJ huh.


Did they still have dial up in 2005? Hmmm.

_________________
GDE FT Ecotune, EHM, Weeks kit stage 1 & 2, Carter 4600 lift pump, Upgraded tranny, Fishing boat hauler!
New at 164K: head gasket, rockers, exhaust valves, ARP head studs, Injectors, 5v Bosch glow plugs, water pump, timing everything, serpentine everything,
New at 225k: new head, timing belt


Top
 Profile  
 
 Post subject: Re: Head Gasket replacement procedures
PostPosted: Fri Jan 27, 2023 1:45 pm 
Offline
LOST Member

Joined: Sat Jul 10, 2010 7:38 pm
Posts: 421
Location: The Dalles, OR.
Got the new head installed last night.
I'd post a pic but... :furious:

_________________
GDE FT Ecotune, EHM, Weeks kit stage 1 & 2, Carter 4600 lift pump, Upgraded tranny, Fishing boat hauler!
New at 164K: head gasket, rockers, exhaust valves, ARP head studs, Injectors, 5v Bosch glow plugs, water pump, timing everything, serpentine everything,
New at 225k: new head, timing belt


Top
 Profile  
 
 Post subject: Re: Head Gasket replacement procedures
PostPosted: Fri Jan 27, 2023 6:10 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 7157
Location: Central GA
DieselJeepLuvr wrote:
Got the new head installed last night.
I'd post a pic but... :furious:

You can post pictures,you just have to follow the instructions that I shared earlier. :wink:
I post them all the time with no issues....but it must be link to a picture .jpg, .png, .gif, etc...See List Below
viewtopic.php?p=952596#p952596

Picture link Example:
Image

Picture Formats:
Image

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
 Post subject: Re: Head Gasket replacement procedures
PostPosted: Fri Jan 27, 2023 10:54 pm 
Offline
LOST Member

Joined: Sat Jul 10, 2010 7:38 pm
Posts: 421
Location: The Dalles, OR.
Too much work.
Finding a hosting service.
Downloading pics to it.
Copying it's url.
Going back to here.
Pressing the Img button.
Putting a space between it.
Pasting the url.
Hoping it doesn't reject it because it's too big or the wrong format.

_________________
GDE FT Ecotune, EHM, Weeks kit stage 1 & 2, Carter 4600 lift pump, Upgraded tranny, Fishing boat hauler!
New at 164K: head gasket, rockers, exhaust valves, ARP head studs, Injectors, 5v Bosch glow plugs, water pump, timing everything, serpentine everything,
New at 225k: new head, timing belt


Top
 Profile  
 
 Post subject: Re: Head Gasket replacement procedures
PostPosted: Sat Jan 28, 2023 2:43 am 
Offline
LOST Addict

Joined: Sat Apr 17, 2010 3:29 pm
Posts: 1167
DieselJeepLuvr wrote:
Too much work.
Finding a hosting service.
Downloading pics to it.
Copying it's url.
Going back to here.
Pressing the Img button.
Putting a space between it.
Pasting the url.
Hoping it doesn't reject it because it's too big or the wrong format.



It can indeed be frustrating... I have had some :furious: times with Photobucket. Can Photobucket's images still be posted on LOSTJEEPS.com?


Top
 Profile  
 
 Post subject: Re: Head Gasket replacement procedures
PostPosted: Sat Jan 28, 2023 4:14 am 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 7157
Location: Central GA
TURBO-DIESEL-FREAK wrote:
It can indeed be frustrating... I have had some :furious: times with Photobucket. Can Photobucket's images still be posted on LOSTJEEPS.com?

Yes if you have an active Photobucket account.
When Photobucket did us all dirty ( :banghead: :furious: ) and locked our accounts and demanded money to unlock them, I switched to Postimages and still use them to this day as they don't charge for their service. https://postimages.org/

Link:> Image

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
 Post subject: Re: Head Gasket replacement procedures
PostPosted: Sat Jan 28, 2023 6:42 pm 
Offline
LOST Junkie

Joined: Sat Oct 13, 2018 10:09 pm
Posts: 541
Location: Australia
The other day I saw a pic of a HG replacement. The HG appeared to have an outer layer of copper. I have not seen a HG for these engines like that before. It was not just covered in copperkote. Can anyone explain? Is such a HG an alternate?

_________________
Australian KJ CRD 2006


Top
 Profile  
 
 Post subject: Re: Head Gasket replacement procedures
PostPosted: Sun Jan 29, 2023 2:07 am 
Offline
LOST Member

Joined: Sat Jul 10, 2010 7:38 pm
Posts: 421
Location: The Dalles, OR.
Pics/ link or it did not happen. I had a dream that I got a 100k out my Jeep without anything breaking down. Then I woke up :ROTFL:

_________________
GDE FT Ecotune, EHM, Weeks kit stage 1 & 2, Carter 4600 lift pump, Upgraded tranny, Fishing boat hauler!
New at 164K: head gasket, rockers, exhaust valves, ARP head studs, Injectors, 5v Bosch glow plugs, water pump, timing everything, serpentine everything,
New at 225k: new head, timing belt


Top
 Profile  
 
 Post subject: Re: Head Gasket replacement procedures
PostPosted: Sun Jan 29, 2023 4:18 pm 
Offline
LOST Junkie

Joined: Sat Oct 13, 2018 10:09 pm
Posts: 541
Location: Australia
DieselJeepLuvr wrote:
Pics/ link or it did not happen. I had a dream that I got a 100k out my Jeep without anything breaking down. Then I woke up :ROTFL:


The pic was on the CRD group on Facebook. It would not work here.
If you dont have something positive to say, best scroll on!

_________________
Australian KJ CRD 2006


Top
 Profile  
 
 Post subject: Re: Head Gasket replacement procedures
PostPosted: Sun Jan 29, 2023 4:35 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 7157
Location: Central GA
layback40 wrote:
DieselJeepLuvr wrote:
Pics/ link or it did not happen. I had a dream that I got a 100k out my Jeep without anything breaking down. Then I woke up :ROTFL:


The pic was on the CRD group on Facebook. It would not work here.
If you dont have something positive to say, best scroll on!

It will work if posted correctly.
I believe this is it:

Image

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
 Post subject: Re: Head Gasket replacement procedures
PostPosted: Sun Jan 29, 2023 11:43 pm 
Offline
LOST Member

Joined: Sat Jul 10, 2010 7:38 pm
Posts: 421
Location: The Dalles, OR.
layback40 wrote:
If you dont have something positive to say, best scroll on!


Lighten up Francis.

_________________
GDE FT Ecotune, EHM, Weeks kit stage 1 & 2, Carter 4600 lift pump, Upgraded tranny, Fishing boat hauler!
New at 164K: head gasket, rockers, exhaust valves, ARP head studs, Injectors, 5v Bosch glow plugs, water pump, timing everything, serpentine everything,
New at 225k: new head, timing belt


Top
 Profile  
 
 Post subject: Re: Head Gasket replacement procedures
PostPosted: Mon Jan 30, 2023 12:39 am 
Offline
LOST Member

Joined: Sat Jul 10, 2010 7:38 pm
Posts: 421
Location: The Dalles, OR.
WWDiesel wrote:
layback40 wrote:
DieselJeepLuvr wrote:
Pics/ link or it did not happen. I had a dream that I got a 100k out my Jeep without anything breaking down. Then I woke up :ROTFL:


The pic was on the CRD group on Facebook. It would not work here.
If you dont have something positive to say, best scroll on!

It will work if posted correctly.
I believe this is it:

Image


Dude! How are you posting a picture from my Facebook group post here???????? There is literally NO way to get the URL address from a picture on Facebook! Are you sending it to your photo sharing service? Then posting it's URL?
:dizzy:

_________________
GDE FT Ecotune, EHM, Weeks kit stage 1 & 2, Carter 4600 lift pump, Upgraded tranny, Fishing boat hauler!
New at 164K: head gasket, rockers, exhaust valves, ARP head studs, Injectors, 5v Bosch glow plugs, water pump, timing everything, serpentine everything,
New at 225k: new head, timing belt


Top
 Profile  
 
 Post subject: Re: Head Gasket replacement procedures
PostPosted: Mon Jan 30, 2023 3:54 am 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 7157
Location: Central GA
DieselJeepLuvr wrote:
WWDiesel wrote:
Dude! How are you posting a picture from my Facebook group post here???????? There is literally NO way to get the URL address from a picture on Facebook! Are you sending it to your photo sharing service? Then posting it's URL?
:dizzy:


I'm smart! :lol: :ROTFL: :goink:
No, I am not copying your pictures or putting them on any sharing service.
It is super easy to obtain any pictures address and then repost it here on LOSTJeeps. [url]Pictures address[/url]
Been doing it for many years! :wink:

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
 Post subject: Re: Head Gasket replacement procedures
PostPosted: Mon Jan 30, 2023 3:55 am 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 7157
Location: Central GA
DieselJeepLuvr wrote:
Dude! How are you posting a picture from my Facebook group post here???????? There is literally NO way to get the URL address from a picture on Facebook! Are you sending it to your photo sharing service? Then posting it's URL?
:dizzy:

I'm smart! :lol: :ROTFL: :goink:
No, I am not copying your pictures or putting them on any sharing service.
It is super easy to obtain any pictures address and then repost it here on LOSTJeeps. [url]Pictures address[/url]
Been doing it for many years! You can do it too! :wink:

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
 Post subject: Re: Head Gasket replacement procedures
PostPosted: Tue Jan 31, 2023 9:33 pm 
Offline
LOST Junkie

Joined: Sat Oct 13, 2018 10:09 pm
Posts: 541
Location: Australia
https://scontent.fmel8-1.fna.fbcdn.net/v/t39.30808-6/326508621_726866158795433_4778920914910337838_n.jpg?stp=dst-jpg_p843x403&_nc_cat=110&ccb=1-7&_nc_sid=5cd70e&_nc_ohc=Gc3mzwjLClIAX--4Tga&_nc_ht=scontent.fmel8-1.fna&oh=00_AfBKkpA9js49Of_arQQBlBW98StpbWYxaOYOrWgtKoXrvA&oe=63DE3AAF

This is the url for the copper looking HG on FB.

_________________
Australian KJ CRD 2006


Top
 Profile  
 
 Post subject: Re: Head Gasket replacement procedures
PostPosted: Tue Jan 31, 2023 10:29 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 7157
Location: Central GA
layback40 wrote:
This is the url for the copper looking HG on FB.

He sprayed it on; it is copper coat spray. If you read his comments....

From his facebook post, quote:
Robert Dys, the Author wrote:
Spray it on, then let it cure for a couple of hours. Helps to transfer heat hopefully to avoid hot spots which can cause a blown head gasket in the future
Image

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
 Post subject: Re: Head Gasket replacement procedures
PostPosted: Wed Feb 01, 2023 7:40 am 
Offline
LOST Member

Joined: Mon Jul 18, 2016 6:33 am
Posts: 412
Location: Central KY
That's what I did to my HG when I replaced it about 20K ago. Time will tell...

_________________
2005 Liberty CRD, with 135,XXX miles. Rockers, exhaust valves, Provent, EGR block & butterfly delete & V6 air box at 100K

1998 XJ 4.0L, stock with 130,XXX miles

First Jeep: 1962 Willys CJ-3B


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 59 posts ]  Go to page Previous  1, 2, 3

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 25 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com