@DieselJeepLuvr


https://www.rockauto.com/en/moreinfo.ph ... 00&jsn=925

ON EDIT-- NEVER mind about the failsafe thermostats !!!

A little more research shows that they tend to "fail open" around 220*F ...which is still too close to normal operating temperatures under some circumstances (think towing).
That means a failsafe thermostat tend to lock open and thus tend to fail more often then a standard thermostat.

Of course, once a failsafe thermostat locks open, it stays open until replaced.
Perhaps a good idea, but definitely poorly implemented, and to be AVOIDED.

https://www.jeepforum.com/threads/warni ... at.872316/

_________________
Horses in the stable:

"Giddyup" is my 2005 Liberty CRD
"Maya" is my 2005 Dodge Ram 2500 CTD powered by the mighty Cummins ISB 5.9 with 6spd G56 manual trans
"Mr Ed" is my 1980 Toyota Pickup Flatbed, 20R engine, 4 speed manual, NO power steering, NO A/C

@DieselJeepLuvr

Got the core refund already.

Gotta love the quick, across the board customer service.

Thanks again.

_________________
Horses in the stable:

"Giddyup" is my 2005 Liberty CRD
"Maya" is my 2005 Dodge Ram 2500 CTD powered by the mighty Cummins ISB 5.9 with 6spd G56 manual trans
"Mr Ed" is my 1980 Toyota Pickup Flatbed, 20R engine, 4 speed manual, NO power steering, NO A/C

Thanks for the good review! Curious as to how it handles under load in hot weather towing situations. It is a higher flowing thermostat than stock so I'd imagine it will handle cooling better.

_________________
GDE FT Ecotune, EHM, Weeks kit stage 1 & 2, Carter 4600 lift pump, Upgraded tranny, Fishing boat hauler!
New at 164K: head gasket, rockers, exhaust valves, ARP head studs, Injectors, 5v Bosch glow plugs, water pump, timing everything, serpentine everything,
New at 225k: new head, timing belt

I have NO doubt that the higher temp and higher flow thermostat replacement, along with the 3.7 11 blade fan mod I installed at the same time, will ONLY help my KJ CRD run hotter, cleaner and more efficiently, while ALSO letting the radiator more easily maintain the higher operating temperatures.

IOW, particularly when combined with the HD fan clutch and 11 blade fan mod, your thermostat housing replacement is part of a win/win scenario!!!

_________________
Horses in the stable:

"Giddyup" is my 2005 Liberty CRD
"Maya" is my 2005 Dodge Ram 2500 CTD powered by the mighty Cummins ISB 5.9 with 6spd G56 manual trans
"Mr Ed" is my 1980 Toyota Pickup Flatbed, 20R engine, 4 speed manual, NO power steering, NO A/C

So an apology and update. Apparently the installation instructions sent with your new Modded Thermostat showed the wrong replacement Gates model. It is supposed to be Gates 34053 NOT 34198!

I'm blaming

R

_________________
GDE FT Ecotune, EHM, Weeks kit stage 1 & 2, Carter 4600 lift pump, Upgraded tranny, Fishing boat hauler!
New at 164K: head gasket, rockers, exhaust valves, ARP head studs, Injectors, 5v Bosch glow plugs, water pump, timing everything, serpentine everything,
New at 225k: new head, timing belt

Instructions, what instructions...threw those away first!!!

NOT worried about a typo.... as long as it has the correct thermostat in it already!!!

More importantly, I just sent you a PM with an important question on the THREAD SIZE and TAPER of one the fittings going into the thermostat housing...would MUCH appreciate a reply ASAP as I would like to replace it with a 90* barb instead, full well knowing it might be hard to do that.

_________________
Horses in the stable:

"Giddyup" is my 2005 Liberty CRD
"Maya" is my 2005 Dodge Ram 2500 CTD powered by the mighty Cummins ISB 5.9 with 6spd G56 manual trans
"Mr Ed" is my 1980 Toyota Pickup Flatbed, 20R engine, 4 speed manual, NO power steering, NO A/C

Ugh. You would! I responded to your message darn it! Why are you not responding??? Waiting. Waiting. Waiting.

_________________
GDE FT Ecotune, EHM, Weeks kit stage 1 & 2, Carter 4600 lift pump, Upgraded tranny, Fishing boat hauler!
New at 164K: head gasket, rockers, exhaust valves, ARP head studs, Injectors, 5v Bosch glow plugs, water pump, timing everything, serpentine everything,
New at 225k: new head, timing belt

For some reason I am NOT receiving your private messages...I dont think its on my end as member WWDiesel and I have been freely exchanging PM's about other things.

Try emailing me directly iisseafish@gmail.com ??

_________________
Horses in the stable:

"Giddyup" is my 2005 Liberty CRD
"Maya" is my 2005 Dodge Ram 2500 CTD powered by the mighty Cummins ISB 5.9 with 6spd G56 manual trans
"Mr Ed" is my 1980 Toyota Pickup Flatbed, 20R engine, 4 speed manual, NO power steering, NO A/C

Update: I am no longer accepting extra cores for credit. Thank you for all the people who sent in multiples. I now have a good stock of them so I can keep them on the shelf ready to ship.

_________________
GDE FT Ecotune, EHM, Weeks kit stage 1 & 2, Carter 4600 lift pump, Upgraded tranny, Fishing boat hauler!
New at 164K: head gasket, rockers, exhaust valves, ARP head studs, Injectors, 5v Bosch glow plugs, water pump, timing everything, serpentine everything,
New at 225k: new head, timing belt

Robert,

Please check you PM messages and get back to me ASAP.

Thank you!!!

_________________
Horses in the stable:

"Giddyup" is my 2005 Liberty CRD
"Maya" is my 2005 Dodge Ram 2500 CTD powered by the mighty Cummins ISB 5.9 with 6spd G56 manual trans
"Mr Ed" is my 1980 Toyota Pickup Flatbed, 20R engine, 4 speed manual, NO power steering, NO A/C

PM sent

_________________
GDE FT Ecotune, EHM, Weeks kit stage 1 & 2, Carter 4600 lift pump, Upgraded tranny, Fishing boat hauler!
New at 164K: head gasket, rockers, exhaust valves, ARP head studs, Injectors, 5v Bosch glow plugs, water pump, timing everything, serpentine everything,
New at 225k: new head, timing belt

@dieseljeepluver Thank you for standing behind your product!!

_________________
Horses in the stable:

"Giddyup" is my 2005 Liberty CRD
"Maya" is my 2005 Dodge Ram 2500 CTD powered by the mighty Cummins ISB 5.9 with 6spd G56 manual trans
"Mr Ed" is my 1980 Toyota Pickup Flatbed, 20R engine, 4 speed manual, NO power steering, NO A/C

NP bud. Get well!

_________________
GDE FT Ecotune, EHM, Weeks kit stage 1 & 2, Carter 4600 lift pump, Upgraded tranny, Fishing boat hauler!
New at 164K: head gasket, rockers, exhaust valves, ARP head studs, Injectors, 5v Bosch glow plugs, water pump, timing everything, serpentine everything,
New at 225k: new head, timing belt

Hi DieselJeepLuvr,

I sent you a PM, and looking fwd to hearing back from you.

Steve

Just a heads up, I've been out of town for the last couple of months and just got back. I'm hoping to get a batch built by the end of this weekend but I'm working limited hours because of this heat.

Thanks for your patience.

_________________
GDE FT Ecotune, EHM, Weeks kit stage 1 & 2, Carter 4600 lift pump, Upgraded tranny, Fishing boat hauler!
New at 164K: head gasket, rockers, exhaust valves, ARP head studs, Injectors, 5v Bosch glow plugs, water pump, timing everything, serpentine everything,
New at 225k: new head, timing belt

Replied...

_________________
GDE FT Ecotune, EHM, Weeks kit stage 1 & 2, Carter 4600 lift pump, Upgraded tranny, Fishing boat hauler!
New at 164K: head gasket, rockers, exhaust valves, ARP head studs, Injectors, 5v Bosch glow plugs, water pump, timing everything, serpentine everything,
New at 225k: new head, timing belt

Replied back...

DieselJeepLuvr - I tried a few times to send a PM but the message just sits in the outbox??
I need a thermostat please.

_________________
05 CRD Owner. Diesel good. Gas bad.

Sent you a PM

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve

So just a heads up. I rarely come here any more. Best way to contact me is via Facebook "Jeep Liberty CRD" group if you message me here and don't hear back right away. I have all new thermostats that are cast aluminum based on my modded design so I don't need your old ones any more. I'd post a pic of them but it's too much of a pain in the stupid

[img]https://www.facebook.com/photo/?fbid=25896177309979838&set=gm.25514150268205051&idorvanity=255347647845328&__cft__[0]=AZYpEcJIxDN6FRX4Mr33WIfb8cfbrH7iwQGKE0UCTBvlCR5UvgOPllzmDz040Je1i_OYW3Te5lr1VCbqDXendHlolye_q_4RrHMVLAYZ008EnWZ1mkrfvrGvULmLQM8YFk_LBbyY2Ax_sKoBTM2f-gg2&__tn__=EH-R[/img] [url]https://www.facebook.com/photo/?fbid=25896177309979838&set=gm.25514150268205051&idorvanity=255347647845328&__cft__[0]=AZYpEcJIxDN6FRX4Mr33WIfb8cfbrH7iwQGKE0UCTBvlCR5UvgOPllzmDz040Je1i_OYW3Te5lr1VCbqDXendHlolye_q_4RrHMVLAYZ008EnWZ1mkrfvrGvULmLQM8YFk_LBbyY2Ax_sKoBTM2f-gg2&__tn__=EH-R[/url]

_________________
GDE FT Ecotune, EHM, Weeks kit stage 1 & 2, Carter 4600 lift pump, Upgraded tranny, Fishing boat hauler!
New at 164K: head gasket, rockers, exhaust valves, ARP head studs, Injectors, 5v Bosch glow plugs, water pump, timing everything, serpentine everything,
New at 225k: new head, timing belt