I have searched and struck out. Is there a good exhaust mod?

WWDiesel · **Posted:** Wed Mar 26, 2014 11:18 am

Our CRD's require 2.5 inch center in, center outlet muffler. :wink:

jrsavoie · **Posted:** Wed Mar 26, 2014 2:21 pm

Still looking for a good heavy duty stainless kit that will last forever and a day

Gageraid · **Posted:** Wed Mar 26, 2014 2:31 pm

jrsavoie wrote:

Still looking for a good heavy duty stainless kit that will last forever and a day

http://gibsonperformance.com/products/r ... mber=17205

I run this on my KK and it says it will work for you, too. Unless I'm misreading something. This one sounds perfect on the 3.7L. Maybe even better on your diesel.

joelukex4 · **Joined:** Thu Sep 29, 2011 4:54 pm **Posts:** 386

jrsavoie wrote:

Still looking for a good heavy duty stainless kit that will last forever and a day

I did this:

Bought a stainless exhaust pipe from Gibson. They were the only ones that would sell me one without buying their full system. Then bought an Aeroturbine stainless muffler off Ebay.

http://www.ebay.com/itm/Aero-Turbine-Pe ... 1125811877

I took both to muffler shop and for $50 they cut off the restriction and added a stainless piece from the Cat to where the muffler would be and mounted it with the exhaust pipe. Full stainless system for about $250.

jrsavoie · **Posted:** Wed Mar 26, 2014 2:56 pm

Thanks

I appreciate it.

joelukex4 wrote:

jrsavoie wrote:

Still looking for a good heavy duty stainless kit that will last forever and a day

I did this:

Bought a stainless exhaust pipe from Gibson. They were the only ones that would sell me one without buying their full system. Then bought an Aeroturbine stainless muffler off Ebay.

http://www.ebay.com/itm/Aero-Turbine-Pe ... 1125811877

I took both to muffler shop and for $50 they cut off the restriction and added a stainless piece from the Cat to where the muffler would be and mounted it with the exhaust pipe. Full stainless system for about $250.

joelukex4 · **Joined:** Thu Sep 29, 2011 4:54 pm **Posts:** 386

Jrsavoie, where are you located? I am near Chicago.

jrsavoie · **Posted:** Thu Mar 27, 2014 8:24 am

joelukex4 wrote:

Jrsavoie, where are you located? I am near Chicago.

sOUTH OF kANKAKEE about 20 miles

dieselguy · **Posted:** Fri May 23, 2014 3:02 pm

jrsavoie wrote:

Still looking for a good heavy duty stainless kit that will last forever and a day

im not sure how much salt driving you do and how anal you are about washing after a salt road drive but up where you live a regular steel pipe on a diesel will probably out live the jeep. down here in the south a regular steel pipe on a diesel is a lifetime pipe. the soot inside the pipe helps prevent rust unlike a gasser.

jrsavoie · **Posted:** Fri May 23, 2014 5:07 pm

dieselguy wrote:

jrsavoie wrote:

Still looking for a good heavy duty stainless kit that will last forever and a day

im not sure how much salt driving you do and how anal you are about washing after a salt road drive but up where you live a regular steel pipe on a diesel will probably out live the jeep. down here in the south a regular steel pipe on a diesel is a lifetime pipe. the soot inside the pipe helps prevent rust unlike a gasser.

I've never had much longevity out of aluminized systems or non-stainless hardware

dieselguy · **Posted:** Sat May 24, 2014 12:03 am

stainless is far superior no doubt

jws84_02 · **Posted:** Sat May 24, 2014 6:37 am

Yes, they use salt up here like it's going out of style. I was just under my jeep and now wishing the rear stabilizer link was also included in that recall last year

I have searched and struck out. Is there a good exhaust mod?

Who is online