LoTek is pre-selling a 3-gauge pillar pod for the Liberty

DOC4444 · **Posted:** Fri Aug 24, 2012 11:52 pm

I have had their 2 gauge pod for several years. I am afraid that in the small space available, a three gauge pod will end up with the top gauge being too close to shorter peoples' heads for safety.

DOC

ChooChooman74 · **Posted:** Sat Aug 25, 2012 11:12 am

CATCRD wrote:

GTS wrote:

I saw this thread and got excited, then read through it was pretty dissapointed in the amount of enthusiasim in the begining and the huge lack of follow through in the end. With the auto tranny (as far as this noobe has found) being the only option for these in the US at least, if you're doing any mods you need all 3 gauges, trans, pyro, and boost. Hence this 3 gauge pod should be top priority for anyone with any performance modifiers.

You can get two-in-one gauges now that make the triple pod pretty much unnecessary. Check out Mcnally gauges for example.

I just checked them out. They are not perfect, but for the amount of space we have in our Jeep, they should work just fine! Thank's for the tip!!!! :BANANA:

CATCRD · **Posted:** Sun Aug 26, 2012 9:34 pm

wifes05crd wrote:

I'd be interested in adding gages. What does it take to connect these? It used to be adding a gage (example oil pressure) would require running a line off the engine block to a pressure gage. How are the sensors installed? Is the data already available but not displayed? Thanks in advance for educating me.

Here is my writeup, and links to a couple others.

spoon · **Posted:** Mon Aug 27, 2012 10:17 pm

links?? write up??

CATCRD · **Posted:** Tue Aug 28, 2012 3:37 pm

spoon wrote:

links?? write up??

Whoops, I thought I hit paste

viewtopic.php?f=5&t=62144

LoTek is pre-selling a 3-gauge pillar pod for the Liberty

Who is online