I got one. Very easy install, after you done it once or twice it takes you 10 min. But yeah the second picture shows it pretty good. Just pull the rubber thing out and stick the cable through. You should then be able to grab it from the inside, right there by the accelerator. To hook up the ground I used a cable shoe with a round end and attached it to the existing ground strut on the driver side fender well. I put the round cable shoe over the thin long bolt (strut or whatever you call it) and then secured it with a screw nut.
Let me know if you need any help
Daniel
_________________
2005 CRD Sport
Mods: Glasspack, OME HD Struts & Springs, 2" Daystar lift,
255/70/16 General Grabber AT2's on MOAB's
ORM&EHM with great success!
TJM T17 Bumper, 50W KC HID's
