| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| a rim selection http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=13007 |
Page 1 of 1 |
| Author: | sempe02 [ Sun Oct 01, 2006 3:57 pm ] |
| Post subject: | a rim selection |
i have a 2006 crd and was wondering if you can run 15x8 rims or do i have to stick with 16x8 and what is our bolt pattern and backspacing for a 31x10.50 or 245 70s |
|
| Author: | KJMedic [ Sun Oct 01, 2006 4:24 pm ] |
| Post subject: | |
I have 245/70/16 on my CRD on stock Wheels, and no lift No rubbing at all. As for your question yes you can run 15x8 wheels on the CRD. I think the back spacing is 5 inch |
|
| Author: | BioJeep [ Sun Oct 01, 2006 4:26 pm ] |
| Post subject: | |
I don't see why you couldn't run 15" rims. Bolt pattern is 5x4.5" (5-114.3mm). |
|
| Author: | sempe02 [ Sun Oct 01, 2006 7:05 pm ] |
| Post subject: | |
I just wasn't sure if the rim would clear the caliper or what |
|
| Author: | BioJeep [ Sun Oct 01, 2006 7:57 pm ] |
| Post subject: | |
Oh... That's a good question, and I have no idea. But, why don't you measure against the current rim for clearance? Or, maybe Tirerack.com or another wheel dealer could help. All you need is 1/2"...there's probably a good chance it'll fit. |
|
| Author: | bugnout [ Sun Oct 01, 2006 10:08 pm ] |
| Post subject: | |
Check the forum on tires and wheels, some 15in wheels fit, some don't. In general it looks like steel 15 inches clear the disk brakes ok, but most alloy's won't |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|