Rusty's airtube on the CRD?

Gator4x · **Posted:** Mon Nov 27, 2006 10:52 pm

Has anyone tried this? Since the airboxes are about the same, I figure the airtube would fit the CRD too. I'm planning on going with a True Flow on the end of it. If it doesn't work, someone let me know!

thanks,
Nick

Goglio704 · **Posted:** Mon Nov 27, 2006 10:55 pm

There are at least two sensors mounted in the lid of the CRD airbox if I remember right. They'll need a home.

Gator4x · **Posted:** Mon Nov 27, 2006 11:41 pm

I thought the sensors were in the tube from the filter to the turbo?

oldnavy · **Posted:** Tue Nov 28, 2006 9:09 am

Gator4x wrote:

I thought the sensors were in the tube from the filter to the turbo?

Nope they be on the airbox lid, one on top and the other on the engine side of the lid.

Gator4x · **Posted:** Tue Nov 28, 2006 11:19 am

Arr, crap.

If the 3.7 and the CRD airboxes are the same, and the 3.7 has the same 2 sensors, then where do the sensors go when the 3.7 guys get the Rusty's Airtube?

I'm guessing the 3.7 DOESN'T have the two sensors???

I'd really like to ditch the airbox and go to an open element filter. Has anyone done this?

thanks,
Nick

oldnavy · **Posted:** Tue Nov 28, 2006 12:02 pm

Gator4x wrote:

Arr, crap.

If the 3.7 and the CRD airboxes are the same, and the 3.7 has the same 2 sensors, then where do the sensors go when the 3.7 guys get the Rusty's Airtube?

I'm guessing the 3.7 DOESN'T have the two sensors???

I'd really like to ditch the airbox and go to an open element filter. Has anyone done this?

thanks,
Nick

Box is same, lid's are different.

Gator4x · **Posted:** Tue Nov 28, 2006 1:05 pm

arrright! I guess I'll have to design something or just buy the AEM.

Rusty's airtube on the CRD?

Who is online