| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| P P Module...Great Pics: Fuel Pressure/Boost Pressure Sensor http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=15877 |
Page 1 of 1 |
| Author: | DarbyWalters [ Sun Dec 24, 2006 9:38 am ] |
| Post subject: | P P Module...Great Pics: Fuel Pressure/Boost Pressure Sensor |
http://painlessperformance.com/Manuals/ ... uction.pdf Has some great pics of Fuel Pressure Sensor and Boost Pressure Sensor. It also locates a hole in the firewall to pass thru wires. Just some good info...not pushing Painless Performance Module. **Note:PP Module might be good tho...lol |
|
| Author: | DarbyWalters [ Sun Dec 24, 2006 9:55 am ] |
| Post subject: | |
They also have a "FE MODULE" for the Liberty CRD that is to gain fuel mileage only at: http://painlessperformance.com/webcatal ... ield=64265 **Note: still not pushing these guys but they have some cool stuff on the website |
|
| Author: | GilaMonster [ Sun Dec 24, 2006 1:53 pm ] |
| Post subject: | |
I would be interested if they could program up a transmission control module for our transmission/torque converter as in this product link: http://painlessperformance.com/webcatalog/2007Catalog/catview.php?SearchField=27 |
|
| Author: | DarbyWalters [ Sun Dec 24, 2006 2:41 pm ] |
| Post subject: | |
They also have a Turbo Timer module. They are only about 300 miles from me...I might look them up early next year |
|
| Author: | marauderer [ Sun Dec 24, 2006 5:44 pm ] |
| Post subject: | |
Hey DW, is there a link to why your motor was replaced at 8100 mi? If so I am interested. |
|
| Author: | Endurance [ Sun Dec 24, 2006 6:06 pm ] |
| Post subject: | |
Im sure the FE module is the same as the regular module, it just has one mode, the FE mode. These are SP modules by the way. |
|
| Author: | elysium [ Sun Dec 24, 2006 6:36 pm ] |
| Post subject: | |
And it allows you to mess around with boost pressure? Neat-o but I'm a little worried about putting a chip in my vehicle because I've had no problems with it and it has plenty of torque already. |
|
| Author: | DarbyWalters [ Sun Dec 24, 2006 6:42 pm ] |
| Post subject: | |
elysium wrote: And it allows you to mess around with boost pressure? Neat-o but I'm a little worried about putting a chip in my vehicle because I've had no problems with it and it has plenty of torque already.
It does adjust Fuel Pressure but only Reads Boost and reports both on your module in cabin. |
|
| Author: | DarbyWalters [ Sun Dec 24, 2006 6:44 pm ] |
| Post subject: | |
marauderer wrote: Hey DW, is there a link to why your motor was replaced at 8100 mi? If so I am interested.
Look under Great Dealers for CRD Sticky...1st post. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|