I am looking for a lift and I would like to stay in the 2" range, and I would like to put 265/70R16 tires on for a little wider stance. After much research on the forum I am leaning towards the 1.5" front/ 2" rear daystar but I am not sure if this lift would allow the 265/70. Revtek's website says that their 2" lift will allow 265/70 tires, but I have not seen or heard much about Revtek for CRDs. So my questions are
1) Is the Revtek lift okay for a CRD based off of anyones experiences?
2) Will the daystar lift work for this tire (265/70)?
3) For the 265/70 R 16, is anyone running this tire with success and how much rubbing/trimming did you experience?

Thanks

_________________
2005 Liberty CRD, 245/75R16, OME CRD Springs front, OME HD rear

I think either would work fine with the CRD...I am actually leaning toward the RevTek for starters...a friend put one on his 2003 a while back with 255/70/16's...then 245/75/16s and it worked great. The CRD should work just as well and I think 2" on the CRD is most likely a very "part friendly" lift.

_________________
Founder of L.O.S.T.
2006 CRD Sport
Mods: GDE Hot Tune w/ 364#@2000rpm/Air Box /3" Str8 Exhaust/ASFIR Alum Skids/245-75R-16 Cooper STT PRO/OME LIFT w/Clevis & 4 Spring Isos/AirTabs/Rigid 10" S2 LED/4xGuard Ctr Matrix Bumper
Drag Strip:Reac=.1078_60ft=2.224_1/8=10.39@64.8mph_1/4+16.46@80.8mph

........

_________________
2005 Unlimited (LJ) Rubicon w/ 5.5" of total lift
Flat Fenders made by http://www.jpfaboffroad.com/

"Democracy is two wolves and a lamb voting on what to have for lunch.
Liberty is a well-armed lamb contesting the vote." - Benjamin Franklin, 1759