| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Spring Length. http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=16296 |
Page 1 of 1 |
| Author: | spencevans [ Mon Jan 08, 2007 12:22 pm ] |
| Post subject: | Spring Length. |
I am looking at developing a true 3" suspension lift for the CRD's that will support an aftermarket front bumper and winch. I am sick and tired of not having the ability to run a true suspension lift. I have a few idea's of how to make this work. My question is what is the free spring length on the front coils of a stock CRD? |
|
| Author: | pokey555 [ Mon Jan 08, 2007 1:12 pm ] |
| Post subject: | |
The compressed length is ~12" and a rate of 410lb/in, assuming the corner weight is 1200lb, the uncompressed length is ~15", and an O.D of 4.5". I am in the process of having upper shock mounts made for my solution to the lack of spring rates to choose from. It is, however; not cheap the total so far is a little under $800. If you are interested I could post my part list, and get you a set of shock mounts since I will have enough raw material for another set. Rob |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|