Have you had any work done on it
If so I would first look in the area where the mechanic working 
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Spare parts? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=17430 |
Page 1 of 1 |
| Author: | Groo [ Thu Feb 08, 2007 7:52 am ] |
| Post subject: | Spare parts? |
About a week ago I was cleaning my boost pressure sensor as per the FAQ, and I noticed part of a broken aluminum mouning brackte wedged under my fuel rail. I worked it out and took the dealership, asked if they could find where it came from. They said they put it on a lift and took a look, but had no luck. I was wondering if anyone here had any ideas. Here is a quick description of the the peice: aluminum, approx 2in long, and 1.5 inches wide, one side is sheared off the the other has a rubber bushing in it. The center and face of the busing are steel, I can see where a bolt used to attached on the face. The back side of the steel center does not open up in to a large face, and the hole (conduit?) passing through the rubber bushing is oblong, not perfectly round. I will try and post a pic, I just need to find some where on the web I can host it first. Thanks to any and all for any help[/img] |
|
| Author: | Joe Romas [ Thu Feb 08, 2007 8:43 am ] |
| Post subject: | |
Have you had any work done on it If so I would first look in the area where the mechanic working
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|