| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| F37 by build date? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=17563 |
Page 1 of 2 |
| Author: | Goglio704 [ Sun Feb 11, 2007 9:16 pm ] |
| Post subject: | F37 by build date? |
If your CRD has not been recalled under F37, please post your build date and model year. Trying to find out what the cutoff date is and how many have been overlooked. If you have an 06 that is covered under F37 please post that also (at least until we get a representative sampling of build dates.) Just to be clear, I'm only looking for whether Jeep said the vehicle needs the F37, not whether it has actually been done. Thanks in advance. |
|
| Author: | kb61751 [ Sun Feb 11, 2007 9:18 pm ] |
| Post subject: | Mine has not |
Mine has not. |
|
| Author: | BVCRD [ Sun Feb 11, 2007 10:53 pm ] |
| Post subject: | |
Mine is not on the list. Build date 12/05 |
|
| Author: | KenJennings [ Sun Feb 11, 2007 11:02 pm ] |
| Post subject: | |
My ride is not on the list: |
|
| Author: | BVCRD [ Sun Feb 11, 2007 11:08 pm ] |
| Post subject: | |
So far, no surprises. |
|
| Author: | TDI4BY [ Sun Feb 11, 2007 11:52 pm ] |
| Post subject: | |
Mine is not on the list and works perfect |
|
| Author: | gd5092 [ Sun Feb 11, 2007 11:55 pm ] |
| Post subject: | |
Not on the list. |
|
| Author: | BVCRD [ Sun Feb 11, 2007 11:57 pm ] |
| Post subject: | |
I think I see a pattern. |
|
| Author: | BioDieselDude [ Sun Feb 11, 2007 11:59 pm ] |
| Post subject: | |
02/05 Dealer says it needs it, but not done. 55,000miles so far. |
|
| Author: | DocB [ Mon Feb 12, 2007 12:00 am ] |
| Post subject: | |
Not mine. |
|
| Author: | Goglio704 [ Mon Feb 12, 2007 12:22 am ] |
| Post subject: | |
Deleted to save space. |
|
| Author: | DZL_LOU [ Mon Feb 12, 2007 12:22 am ] |
| Post subject: | |
I logged onto dealerconnect and looked more closely at the F37 requirements. It applies to both 2005 and 2006 models with a specific cut off date on the MDH which is set at 110214. So 2006 models on the assembly line with a November 02, 2005 at 2:00pm cutoff would also need the F37 applied per DCX. I had the 18-023-06 TSB applied and could tell that even with that the engine had been de-tuned. Since, I had a brand new 545RFE with the 18-023-06 applied, outside of the de-tune I'm not getting the F37. Revised December 2006 Customer Satisfaction Notification F37 Torque Converter and Reprogram ECM/TCM Effective immediately all repairs on involved vehicles are to be performed according to this notification. Service Bulletins #21-009-06 and #18-023-06 2005-2006 (KJ) Jeep® Liberty NOTE: This notification applies only to the above vehicles equipped with a 2.8L diesel engine (“5” in the 8th VIN position) and automatic transmission (sales code DGQ) built through November 2, 2005 (MDH 110214). IMPORTANT: Those vehicles that have already had this repair performed, as determined by our warranty records, have been excluded from this notification. |
|
| Author: | BioCRD [ Mon Feb 12, 2007 12:48 am ] |
| Post subject: | |
Not recalled. 2006, build date 1 April 06 |
|
| Author: | Kellog13 [ Mon Feb 12, 2007 2:13 am ] |
| Post subject: | |
Not on the list, 06CRD. BVCRD- where's that viscous heater located btw. |
|
| Author: | BVCRD [ Mon Feb 12, 2007 8:51 am ] |
| Post subject: | |
Goglio704 wrote: BVCRD wrote: I think I see a pattern. This thread will get long quick if you are going to post every other post. Not a problem. Just basking. |
|
| Author: | BVCRD [ Mon Feb 12, 2007 9:34 am ] |
| Post subject: | |
Kellog13 wrote: Not on the list, 06CRD.
BVCRD- where's that viscous heater located btw. Not too sure of the exact location. I put forth the question to my answer man and will get back to you shortly. |
|
| Author: | BVCRD [ Mon Feb 12, 2007 9:35 am ] |
| Post subject: | |
DZL_LOU wrote: I logged onto dealerconnect and looked more closely at the F37 requirements. It applies to both 2005 and 2006 models with a specific cut off date on the MDH which is set at 110214. So 2006 models on the assembly line with a November 02, 2005 at 2:00pm cutoff would also need the F37 applied per DCX.
I had the 18-023-06 TSB applied and could tell that even with that the engine had been de-tuned. Since, I had a brand new 545RFE with the 18-023-06 applied, outside of the de-tune I'm not getting the F37. Revised December 2006 Customer Satisfaction Notification F37 Torque Converter and Reprogram ECM/TCM Effective immediately all repairs on involved vehicles are to be performed according to this notification. Service Bulletins #21-009-06 and #18-023-06 2005-2006 (KJ) Jeep® Liberty NOTE: This notification applies only to the above vehicles equipped with a 2.8L diesel engine (“5” in the 8th VIN position) and automatic transmission (sales code DGQ) built through November 2, 2005 (MDH 110214). IMPORTANT: Those vehicles that have already had this repair performed, as determined by our warranty records, have been excluded from this notification. So to clarify, those built after 10/05! |
|
| Author: | DZL_LOU [ Mon Feb 12, 2007 9:35 am ] |
| Post subject: | |
BVCRD wrote: Not a problem. Just basking. Not mis-information, just unsubstantiated information. There is a big difference between being mis-informed and being un-able to substantiate your claim, but propagate that claim as fact. |
|
| Author: | Goglio704 [ Mon Feb 12, 2007 9:36 am ] |
| Post subject: | |
Deleted to save space. |
|
| Author: | BVCRD [ Mon Feb 12, 2007 9:39 am ] |
| Post subject: | |
DZL_LOU wrote: BVCRD wrote: Not a problem. Just basking. Not mis-information, just unsubstantiated information. There is a big difference between being mis-informed and being un-able to substantiate your claim, but propagate that claim as fact. Hey, don't shoot the messenger. Just passing along what I have been told or read. I forget very little, but can't always back up my claims. You said you didn't believe me and you are certainly entitled. Glad you got the facts though. I had read F37 back a few, just ...............Oh well. |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|