| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 2 Questions on the Provent install http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=19067 |
Page 1 of 1 |
| Author: | Zonie [ Wed Mar 28, 2007 2:31 pm ] |
| Post subject: | 2 Questions on the Provent install |
Will the install work ok using one solid piece of hose ea. top and bottom, or will I need to install elbows? Someone has a pretty picture with clear hose on here, but 1. I can't find it and 2. it didn't show the whole hose. Will I need to fasten it to the car, or can I secure it randomly with some nylon ties? |
|
| Author: | ATXKJ [ Wed Mar 28, 2007 2:58 pm ] |
| Post subject: | |
The elbows make a neater install - but they aren't required - if you go with 1 piece hoses make sure you don't kink them in the bends or when you put the engine cover on (if you put the engine cover on) - blocked hoses are bad - I don't remember the error - but it will cause a problem. (most of the hoses are 3/4" and the Provent is 1" openings so you do need reducers) If everything is routed right it doesn't really have room to move - so ties may be overkill - but they might help with keeping the tubing bends routed correctly, so they won't hurt. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|