FUMOTO VALVES ARE INSTOCK!!

oldnavy · **Posted:** Thu Apr 26, 2007 5:54 pm

widowmaker wrote:

You're scaring me oldnavy :wink:

Hey I scare myself sometimes. :wink:

I am not mean, but the mean men always called me sir!!! :twisted:

valkraider · **Posted:** Wed May 02, 2007 7:10 pm

So how are sales?

You getting as many actual buyers as people who said they would buy in the poll?

VACRD · **Posted:** Wed May 02, 2007 8:40 pm

Mine just came in the mail. Will be installed nest oil change.

ccattie · **Posted:** Thu May 03, 2007 8:28 am

So the consensus is if you do use it, have the pan as well?
-c

LanduytG · **Joined:** Sun Dec 11, 2005 6:59 am **Posts:** 188

Still have not gotten all the ordereds from people that said they wanted them.

Greg

ccattie · **Posted:** Tue May 15, 2007 11:22 am

I had no idea you were going to ramp up again and make them. I was told you were done. I didn't have prep time

I have to save up and buy skid plates before I can buy this because I just don't trust it sitting out there. I'm afraid a retread would rip it out.
-c

Flying J · **Posted:** Sat May 19, 2007 9:28 am

Just ordered mine. I was on the fence about 108 or 108N, but there are a lot of re-treads/dead animals/slow bicyclists laying in the roads around here, so I went with 108. Timing should work out perfect for the next oil change.

Thanks for providing these!

CRuD Bucket · **Posted:** Sat May 19, 2007 1:50 pm

Does it stick out or downward?

palla · **Posted:** Fri Aug 31, 2007 10:54 am

So do we have any pics of a non nipple fumoto (F108) with an OEM skid to see how close it is to the skid?

Same question here really?

brew1 · **Posted:** Tue Sep 11, 2007 10:26 pm

Any of these valves and adapters still available? Getting ready to do an oil change shortly and I am debating using this mod instead of the oil extraction method, which can be a PITA at times and takes forever.

Scott Langohr · **Posted:** Wed Sep 12, 2007 8:19 am

New member and did not partisipate in the poll. Ordered mine anyway today. I don't plan on changing my own oil but don't want someone else messing up the drain pan. This site is great.

skywarn · **Posted:** Wed Sep 12, 2007 11:38 am

Welcome Scott! beleave me after you put this on.. you will want to change your own oil... shoot youll be saving close to $50 in labor!

cocojo · **Posted:** Thu Sep 13, 2007 9:39 pm

Ordered mine.

brew1 · **Posted:** Fri Sep 14, 2007 6:12 pm

Me too, I'm almost looking forward to changing the oil.

Will be switching over to Amsoil Oil Filter and oil as well.

LocoCRD · **Posted:** Fri Sep 14, 2007 8:05 pm

Finally got around to ordering mine too.

05crd · **Joined:** Wed Jun 27, 2007 2:54 pm **Posts:** 47

Just got through changing the oil and will be ordering a fumoto. Not sure how risky it is to have sticking down from the pan but it has to make changing the oil less messy!

Scott Langohr · **Posted:** Wed Sep 19, 2007 5:03 pm

Got mine quick. It did not come with a gasket for the adapter to pan. The one on the valve should be a good sample to match it up at NAPA anyway. I am 4000 mi away from a change. It looks like a better way and should save any chance of cross threading or stripping the pan threads. Thanks

LanduytG · **Joined:** Sun Dec 11, 2005 6:59 am **Posts:** 188

Scott Langohr wrote:

Got mine quick. It did not come with a gasket for the adapter to pan. The one on the valve should be a good sample to match it up at NAPA anyway. I am 4000 mi away from a change. It looks like a better way and should save any chance of cross threading or stripping the pan threads. Thanks

It does not come with one because you use the metal gasket on the OEM plug.

Greg

cocojo · **Posted:** Thu Sep 20, 2007 5:14 pm

Does anyone here use blue lock tight between the value and the adapter for added security? Not into the oil pan but just between the adapted and value.

Scott Langohr · **Posted:** Thu Sep 20, 2007 5:36 pm

Thanks for the info Greg!

FUMOTO VALVES ARE INSTOCK!!

Who is online