LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

shopping for CRD chip
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=22249		 Page 1 of 1
Author:  o8k [ Wed Jul 04, 2007 7:32 pm ]
Post subject:  shopping for CRD chip
Anyone have any suggestions, i would mainly be looking for somthing that provides max econ rather than max power gain.

This thing any good?
Stricker I Diesel power module?
http://www.jeepinbyal.com/files/index.php?id=20

Or this thing?
http://www.dieseltuning.ca/modules/cr.html

or anyothers anyone has had experience w/
Author:  DarbyWalters [ Wed Jul 04, 2007 7:48 pm ]
Post subject: 
http://painless.r-catalog.com/pg-lkp/listparts.asp

The Striker FE (Fuel Economy) module might be what you are looking for but

http://painless.r-catalog.com/pg-lkp/listparts.asp

This model has Power and FE mode alsong with some other features but

http://painless.r-catalog.com/pg-lkp/products.asp

Has more settings and gives you Fuel Rail Pressure and Boost Pressure Readings
Author:  Joe Romas [ Wed Jul 04, 2007 10:48 pm ]
Post subject: 
DarbyWalters wrote:
http://painless.r-catalog.com/pg-lkp/listparts.asp

The Striker FE (Fuel Economy) module might be what you are looking for but

http://painless.r-catalog.com/pg-lkp/listparts.asp

This model has Power and FE mode alsong with some other features but

http://painless.r-catalog.com/pg-lkp/products.asp

Has more settings and gives you Fuel Rail Pressure and Boost Pressure Readings


Darby.

Your links don't work for me :cry:
Author:  DarbyWalters [ Wed Jul 04, 2007 10:50 pm ]
Post subject: 
Google Painless Performance then do a specific vehicle search...that should get you there
Author:  Endurance [ Thu Jul 05, 2007 1:29 am ]
Post subject: 
I got one for sale in the for sale section, its a SP Diesel module
Author:  nix [ Thu Jul 05, 2007 10:12 am ]
Post subject: 
o8k, I'm with you.. I'm looking for a performance chip for mine as well. I was looking at getting the SP Diesel chip and noticed they make the Painless Striker module for Painless. Considering the Painless is $409 from a big online retailer and the SP Diesel is more expensive... I e-mailed them and asked what the difference was and the following was SP Diesel's reply.

Quote:
From: SP Performance, LLC [mailto:spdiesel@spdiesel.com]
Sent: Thursday, July 05, 2007 1:11 AM
To: XXXX
Subject: RE: SIIe for Jeep


go with the Painless...no performance differfence.

Sean

--------------------------------------------------------------------------------
From: XXXX [mailto:xxx@nospam.com]
Sent: Thursday, July 05, 2007 1:29 AM
To: spdiesel@spdiesel.com
Subject: SIIe for Jeep

Hello,

I was wondering what the difference was between your Stage II performance module and the Painless Striker module? Your website shows them as a distributor.. but their product looks slightly different. Is there a performance difference between the two? This is in regards to a Jeep Liberty 2.8L I-4 common-rail turbo-diesel.
Author:  Cowpie1 [ Thu Jul 05, 2007 10:14 am ]
Post subject:  Re: shopping for CRD chip
o8k wrote:
Anyone have any suggestions, i would mainly be looking for somthing that provides max econ rather than max power gain.


I am currently checking out these guys and considering going with their ECU reprogram.

http://cgi.ebay.com/ebaymotors/JEEP-LIB ... 0137636236

They have two levels: Stage 2 which gives max power / performance gains. And Eco Tune which increases power/performance and maximizes fuel mileage. The latter seems to be what you are looking for.

From what information I can glean, they do a TOTAL reprogram of the CRD ECU to coordinate all the different functions so that they compliment each other. They claim that it is not detectable by dealer machines (who knows at this point).

Price is $300. Return overnight shipping included.
Author:  chadhargis [ Thu Jul 05, 2007 10:40 am ]
Post subject: 
InMotion folks are great. I had them do the Stage II tune on mine.

I shipped them my ECU overnight. They flashed it and sent it back overnight same day. It's a three day turnaround.
Author:  DZL_LOU [ Thu Jul 05, 2007 11:14 am ]
Post subject: 
A former CRD owner from DeKalb IL, FarmDiesel posted some very nice results from using Edge and SP modules. His input/analysis was good. If you search on his name, you should be able to gain some of his testing results between those modules.
Author:  o8k [ Thu Jul 05, 2007 8:41 pm ]
Post subject: 
may have to just pony up and try the thing and see how it comes out....

o8k
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/