It is currently Thu Mar 28, 2024 5:11 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 439 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6, 7 ... 22  Next
Author Message
 Post subject:
PostPosted: Mon Sep 24, 2007 3:20 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Tue Jan 31, 2006 12:19 pm
Posts: 376
Location: Rio Rancho, NM
geordi wrote:
Paypal sent, thanks muchly. I'm pretty handy with a soldering iron, but how small are the connections? Are we wiring up any IC connections? If the board is traced and it's just pads... That would be cool. I'm just not crazy about trying to surface solder miniature computer-size IC pads. But I'm guessing these are through-board types?

If there are any pics / directions for assembly and installation that you could point me at while I wait, that would be awesome.

Sheesh, I really have an addiction to modding cars. I'm buying mods for a car I don't even OWN yet! :roll: :lol:


Yep it is a through hole board that is a piece of cake to solder up.

_________________
2005 CRD Limited
1.5/2.0 Daystar Lift
V6 Airbox
SEGR ala TurboTim
255/70/16 Big O on Rubis minor trimming required
87k+ miles=3 factory TC's, 2 front pumps, 1 turbo, & drivers side wheel bearing/hub
Suncoast TC and Transgo Snake oil-41k
New Front Drive shaft-30K
Stage 2 InMotion Tune-54k, makes me go :)
B&M Tranny Cooler


Top
 Profile  
 
 Post subject: SEGR Payment status...
PostPosted: Mon Sep 24, 2007 3:46 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Tue Jan 31, 2006 12:19 pm
Posts: 376
Location: Rio Rancho, NM
List of fame or shame, JK if you have paid and it is not reflected here PM me and I'll get you marked as paid.
Green = Paid, so lets get everyone in the Green.

1. shipped
2. shipped
3. shipped
4. shipped
5. shipped
6. available
7. shipped
8. shipped

9. shipped
10. shipped
11. shipped
12. flatfender
13. shipped
14. bentrod
15. shipped
16. cerich
17. shipped
18. ed. - Australia
19. forensic
20. shipped
21. shipped
22. shipped
23. dumptruck
24. shipped
25. shipped
26. shipped

27. chrismc
28. shipped
29. shipped
30. shipped
31.shipped/
32. shipped/ Really Wants 3
33. shipped/

34. SilverCRD
35. shipped
36. jakemoore
37. shipped
38. shipped
39. shipped
40. shipped
41. shipped
42. shipped
43. shipped
44. shipped
45. shipped
46. shipped
47. shipped

48. rcraigs
49. shipped
50. shipped
51.shipped
52. shipped
53. shipped
54. shipped
55. shipped
56. shipped
57. shipped
58. shipped
59. shipped

60.shipped
61. shipped
62. shipped
63. shipped
64. shipped
65. shipped
66. DigiBit
67. shipped

_________________
2005 CRD Limited
1.5/2.0 Daystar Lift
V6 Airbox
SEGR ala TurboTim
255/70/16 Big O on Rubis minor trimming required
87k+ miles=3 factory TC's, 2 front pumps, 1 turbo, & drivers side wheel bearing/hub
Suncoast TC and Transgo Snake oil-41k
New Front Drive shaft-30K
Stage 2 InMotion Tune-54k, makes me go :)
B&M Tranny Cooler


Last edited by LocoCRD on Sun Oct 14, 2007 7:11 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: How do i buy a ORM MAF CEl elimator or what you call a SERG
PostPosted: Sat Oct 13, 2007 7:29 pm 
Offline
LOST Newbie
User avatar

Joined: Wed Dec 13, 2006 7:36 pm
Posts: 52
Location: ,VA
Please i would love to have one of these kits how can i get one.

Thank you Sharon

_________________
05 liberty Limited CRD, 2" lift ,Goodyear 245 75 R16 on Moto Metal Wheels 16x9,SP Diesel Programer STAGE-II,K&N Air Fliter,Stainless steel door handles,vertical billet grill,Bermuda black LED tail lights,window vent cover,crome side mirror covers.ORM elephant hose,full skids,rock rails,


Top
 Profile  
 
 Post subject:
PostPosted: Sat Oct 13, 2007 8:20 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Tue Jan 31, 2006 12:19 pm
Posts: 376
Location: Rio Rancho, NM
Check your PM box Sharon.

_________________
2005 CRD Limited
1.5/2.0 Daystar Lift
V6 Airbox
SEGR ala TurboTim
255/70/16 Big O on Rubis minor trimming required
87k+ miles=3 factory TC's, 2 front pumps, 1 turbo, & drivers side wheel bearing/hub
Suncoast TC and Transgo Snake oil-41k
New Front Drive shaft-30K
Stage 2 InMotion Tune-54k, makes me go :)
B&M Tranny Cooler


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 14, 2007 12:57 am 
Offline
Lifetime Member
Lifetime Member

Joined: Tue Sep 18, 2007 7:21 pm
Posts: 3092
Location: Texas
Got ours inna mail - lookin' good, dudes - now it's off to the boneyard to get some Jeep factory wiring for the job - prolly snag the fuel lift pump wiring from a non-Diesel also - gotta look absolutely factory, for my tastes - wait'll ya see my treatment of the mounting config back at the tank

_________________
'05 CRD Limited
Pricol EGT, Boost
GDE Hot '11; EDGE Trail switched
SEGR; Provent; Magnaflow;
Suncoast T\C, Transgo Tow'n'Go switch;
Cummins LP module, Fleetguard filter, Filterminder
2.5" Daystar f, OME r; Ranchos; K80767's, Al's lifted uppers
Rubicons, 2.55 Goodyears
Four in a row really makes it go


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 14, 2007 11:17 am 
Offline
LOST Newbie

Joined: Tue Aug 21, 2007 9:18 pm
Posts: 1
Location: Concord, CA
Mine showed up today!
Thanks, it looks great.
Doug

_________________
2005 CRD


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 14, 2007 1:18 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Apr 15, 2006 12:56 pm
Posts: 1830
Location: Spokane, WA
Got mine sometime during the week. Thanks Dennis.

_________________
Dave

'06 CRD Limited, Lt. Khaki, MOPAR Slush Mats/Skids, DrawTite Front Hitch, Mag Lite, Yakima Bars, Thule Bike Rack, Fumoto, ORM, 245/70 Revo 2

Wish list: Lift, Boulder Bars, Something Bigger in the Front and Back, More Lights


Top
 Profile  
 
 Post subject:
PostPosted: Thu Nov 22, 2007 10:34 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Wed Aug 29, 2007 7:43 pm
Posts: 41
Any way I can get one of these at this late date?

_________________
jwalker
Home is Knoxville, TN
Currently full-timing in our RV


Top
 Profile  
 
 Post subject:
PostPosted: Thu Nov 22, 2007 11:40 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Tue Jan 31, 2006 12:19 pm
Posts: 376
Location: Rio Rancho, NM
Check you PM box.

Regards,

Dennis

_________________
2005 CRD Limited
1.5/2.0 Daystar Lift
V6 Airbox
SEGR ala TurboTim
255/70/16 Big O on Rubis minor trimming required
87k+ miles=3 factory TC's, 2 front pumps, 1 turbo, & drivers side wheel bearing/hub
Suncoast TC and Transgo Snake oil-41k
New Front Drive shaft-30K
Stage 2 InMotion Tune-54k, makes me go :)
B&M Tranny Cooler


Top
 Profile  
 
 Post subject: Hope I'm not too late
PostPosted: Sun Nov 25, 2007 12:23 am 
Offline
LOST Junkie

Joined: Sat Nov 17, 2007 3:29 am
Posts: 553
Location: Tolleson, Arizona
I have been lurking but now I need to act.
PM'ed Loco a couple of days ago for a kit.
I'm new to this forum but not to light diesels.
This SEGR idea is absoutely brilliant!

Roland

_________________
2006 CRD LTD 2.8L VM Motori turbo,CAC, 100K-new timing belt
ORM-SEGR, Trans cooler, CLIII hitch front/rear, Journey HD controller
Mopar skids,"Stone Soup" rails, KK clevis fork 1" mild lift w/Daystar stops
215x85 LRD BFG Commercial A/T's, Rola Rack, V6 airbox, Fumoto valve
10K winch, B5 Biodiesel (ULSD CP3 lube)
Its a Diesel baby!


Top
 Profile  
 
 Post subject:
PostPosted: Sun Nov 25, 2007 12:43 am 
Offline
Lifetime Member
Lifetime Member

Joined: Tue Jan 31, 2006 12:19 pm
Posts: 376
Location: Rio Rancho, NM
Check your PM box Silverdiesel.

_________________
2005 CRD Limited
1.5/2.0 Daystar Lift
V6 Airbox
SEGR ala TurboTim
255/70/16 Big O on Rubis minor trimming required
87k+ miles=3 factory TC's, 2 front pumps, 1 turbo, & drivers side wheel bearing/hub
Suncoast TC and Transgo Snake oil-41k
New Front Drive shaft-30K
Stage 2 InMotion Tune-54k, makes me go :)
B&M Tranny Cooler


Top
 Profile  
 
 Post subject: Wonderful
PostPosted: Sun Nov 25, 2007 12:55 am 
Offline
LOST Junkie

Joined: Sat Nov 17, 2007 3:29 am
Posts: 553
Location: Tolleson, Arizona
I am reacting to Loco's reply PM with haste. Thanks for answering.
I feel very lucky and happy to be participating. I can not wait to put this thing together and get that horrible amber engine symbol turned off on my dashboard!

_________________
2006 CRD LTD 2.8L VM Motori turbo,CAC, 100K-new timing belt
ORM-SEGR, Trans cooler, CLIII hitch front/rear, Journey HD controller
Mopar skids,"Stone Soup" rails, KK clevis fork 1" mild lift w/Daystar stops
215x85 LRD BFG Commercial A/T's, Rola Rack, V6 airbox, Fumoto valve
10K winch, B5 Biodiesel (ULSD CP3 lube)
Its a Diesel baby!


Top
 Profile  
 
 Post subject:
PostPosted: Wed Nov 28, 2007 9:05 am 
Offline
LOST Newbie

Joined: Fri Sep 21, 2007 11:26 pm
Posts: 6
Location: Linville Falls, NC
Anyway to get one of theses kits(assembled) at this date? I am new to this but have all the challenges on my 2006 Liberty CRD that everyone else has.


Top
 Profile  
 
 Post subject: Bypass plug
PostPosted: Fri Nov 30, 2007 9:00 am 
Offline
LOST Newbie

Joined: Sat Sep 29, 2007 8:30 am
Posts: 35
Was there supposed to be an extra connector in the kit to wire up as a bypass plug? Didn't see one in mine. If not, what is a good source? Thanks. My kit is built, installed, and works great! I mounted it inside above the brake/clutch pedals.

_________________
06 CRD Frankenlift, SEGR, Suncoast, Mopar lift pump, GDE eco tune
15 Jetta TDI/EA288


Top
 Profile  
 
 Post subject: Re: Bypass plug
PostPosted: Fri Nov 30, 2007 11:55 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Wed Apr 18, 2007 6:25 pm
Posts: 1306
Location: Colorado USA
stp2136 wrote:
Was there supposed to be an extra connector in the kit to wire up as a bypass plug? Didn't see one in mine. If not, what is a good source? Thanks. My kit is built, installed, and works great! I mounted it inside above the brake/clutch pedals.
No, you need to order that yourself. Digikey (digikey.com) has all the parts. I don't have the list in front of me right now, maybe someone can list them before I can later.

_________________
'05 Liberty CRD B100, SEGR - SOLD

'01 Beetle TDi B100, EGR delete
'83 Mercedes 240D B100, no EGR

--- SEGR Builder ---


Top
 Profile  
 
 Post subject:
PostPosted: Sat Dec 01, 2007 10:28 pm 
Offline
LOST Newbie

Joined: Wed Aug 15, 2007 5:39 pm
Posts: 37
Location: Laurinburg NC
lococrd : just for S&G what is he price?

_________________
Stump doctor

Landy Front hitch
2006 CRD all stock
scan guage 2


Top
 Profile  
 
 Post subject:
PostPosted: Sun Dec 02, 2007 3:37 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Wed Apr 18, 2007 6:25 pm
Posts: 1306
Location: Colorado USA
I posted part numbers to build the jumper plug in the builders thread.

_________________
'05 Liberty CRD B100, SEGR - SOLD

'01 Beetle TDi B100, EGR delete
'83 Mercedes 240D B100, no EGR

--- SEGR Builder ---


Top
 Profile  
 
 Post subject: Kit?
PostPosted: Mon Dec 03, 2007 1:17 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Fri Oct 06, 2006 9:15 pm
Posts: 63
I would be interested in a kit. Please add my name to the list.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Dec 05, 2007 6:05 pm 
Offline
LOST Newbie

Joined: Mon Oct 09, 2006 9:30 pm
Posts: 76
Location: Kelowna, BC
Please sign me up for a kit. It can sit on the shelf until warranty is over.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Dec 05, 2007 6:23 pm 
Offline
LOST Member

Joined: Mon Nov 26, 2007 4:46 pm
Posts: 127
Location: Greenwood Lake, NY
Im thinking about a kit here but still need to just research a little more what the kits does and how it is installed.

_________________
'97 Wrangler Sahara with some mods.

'06 Liberty CRD Limited GDE Hot Tune, Lift Pump

Head Gasket and Timing Belt Pics


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 439 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6, 7 ... 22  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 36 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com