| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| New CEL codes for me http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=23784 |
Page 1 of 1 |
| Author: | KJMedic [ Sun Aug 26, 2007 6:40 pm ] |
| Post subject: | New CEL codes for me |
I have some new codes that started this AM. 0876, 0004, and 0700. What do you all make of them. I really do not want to take my toy back to the stealership. I know they all have to do with the Tranny. |
|
| Author: | KJMedic [ Mon Aug 27, 2007 5:53 pm ] |
| Post subject: | |
Can somebody help me here? |
|
| Author: | Cowcatcher [ Mon Aug 27, 2007 5:55 pm ] |
| Post subject: | |
Sorry Charlie. Is it doing anything bad? First thing to do is pull the dip stick and check the fluid level. P0004 Fuel volume regulator control – circuit high Wiring open circuit/short to positive, regulator control solenoid P0700 - Transmission Control System (MIL Request) P0846 - Transmission Fluid Pressure Sensor/Switch B Circuit Range/Performance You might also check the wire bundle around the fuel filter head for chaffing as these seem to be related to multiple systems. |
|
| Author: | stump doctor [ Mon Aug 27, 2007 6:10 pm ] |
| Post subject: | |
KJmedic I had both 0700 and 0876 after changing tranny fluid and filters, and not filling up trans all the way to the hot marks when hot. top off tranny and disconected battery codes dropped. Both codes would clear with scan guage II, but reoccured at start up. VT class of 87 |
|
| Author: | KJMedic [ Mon Aug 27, 2007 7:14 pm ] |
| Post subject: | |
Thanks. The 0876 will not clear the scan gauge. I can turn the CEL off but the code is still in the system. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|