nagged!

Sam,

Thanks for the enquiry. We are always looking to introduce new kits and this
looks like a good opportunity. Is it possible to send over sample hoses so
that we can look at the feasibility of making them? If we don;'t think it's
possible we will return the samples to you.

We will need to sell them through our US distributors and we will need to
guarantee a minimum number of sales, but I'm sure that we can come to an
agreement with you on a free set for supplying the samples to us, assuming
that we go ahead of course.

Best Regards
Paul Hinder

I have the one on the FCV side. I can send that to them

Thats good, If you have that hose I think I might just purchase a new turbo to intercooler hose so we have a complete set.

I guess while we are at it, are there any other hoses we want to get replaced with silicon?

Thats good, If you have that hose I think I might just purchase a new turbo to intercooler hose so we have a complete set.

I guess while we are at it, are there any other hoses we want to get replaced with silicon?

Nice job Sir Sam.
I hope this gets off the ground.

Thats good, If you have that hose I think I might just purchase a new turbo to intercooler hose so we have a complete set.

I guess while we are at it, are there any other hoses we want to get replaced with silicon?

PLEASE DO NOT SEND THEM A USED SET!!!!!!

Dear CRD Owners,

It is obvious from your emails that there is a major problem with the stock Turbo hoses on the Jeep CRD, We are willing to manufacture a kit for the Jeep if someone can supply us with a set of stock hoses or O/E part numbers.

Production would take around 4~6 weeks after we receive the hoses; this is due to the processes involved with manufacturing the tooling.

Please can you also tell me if there is call for the coolant kit on this vehicle to be made by Samco Sport?

I look forward to your thoughts and suggestions.
Best regards,

Mark Hale.

Hello Scott,

I think the hoses may need a Flurosilicone liner if they are getting heavy oil contamination, this would raise the price a little but worth it in the end for a reliable solution.

Let’s see if we can get some stock hoses over from you guys, then we can look at a kit price.

Regards,

Mark.



My Reponse:
--------------------------------------------------------------------------------


Mark,

I am less concerned about the coolant hoses. The price would have to be right for that. The turbo hoses are more a mechanical/safety concern due to pressure/heat involved and recirculating oil vapors that weaken the OEM hoses. This causes the hose to fail by either rupturing or disconnecting(disconnecting was due to clamps not being tightened from the factory or from coming loose as the parts broke in I guess). For this I will pay to correct. The coolant hoses would be for looks only and I am less likely to do this modification unless the price was right. Hope this helps with your decision.

Scott


Original e-mail
--------------------------------------------------------------------------------

Subject: Jeep CRD Turbo Hose Kit

Dear CRD Owners,

It is obvious from your emails that there is a major problem with the stock Turbo hoses on the Jeep CRD, We are willing to manufacture a kit for the Jeep if someone can supply us with a set of stock hoses or O/E part numbers.

Production would take around 4~6 weeks after we receive the hoses; this is due to the processes involved with manufacturing the tooling.

Please can you also tell me if there is call for the coolant kit on this vehicle to be made by Samco Sport?
I look forward to your thoughts and suggestions.

Best regards,

Mark Hale.