I've had my Libby into the dealership 3 times now for ABS warning lights. The first time was in March 06, the cleared the code and all was fine until August 07. Took it in and they replaced a rear wheel speed sensor. That worked for a couple of weeks until I spun the rear wheels one morning and the warning lights came back on. I took it in again this past Monday for this and the fuel filter head replacement. This time they replaced the ABS control module, cleared codes and initialized the cm.... That kept the warning light off for about 6 miles so now I have to take it back again.

I had also just changed the fuel filter and told the service writer not to change it but they did anyway. No charge but I could have put the old one back on had I known this and had another new filter handy.

Sheesh, and this is a forum-recommended (I was one of the recomenders) 5-Star dealer here in Phoenix.

Gary

mmm so warm.

_________________
http://www.Colorado4Wheel.com
"Its not about what you can DO with your Jeep, its about where you can GO with your Jeep."
Knowledgeable - But Caustic

I had the ABS light come on twice. the first time they fixed it I was not concerned. They replaced the ABS sensor. I ASSumed it was done right. The second time I went in I told them to fix what was causing the problem and not just replace the sensor. They did some re-wiring and replaced the sensor. No problems since (about 6 months).

_________________
2005 green CRD sport
Approx 29K miles
No mods, Just a bunch of scratches from twigs.