I was thinking of starting a "Database" of scanner measurements collected from the folks who have products similar to the Scangauge II

I could put together a list of measurments, then y'all could fill in the numbers you get, and post it.

I will compile the data with excel over a couple of weeks, then "publish" the database with "averages".

Things that I want to get some data on, for instance;


MAP as a function of rpm. When should the boost pressure be greatest? Mine drops of after 2200 rpm.
Air temperature. With ORM / without. (Normalised with ambient temp)
Typical and Max water temps. I have seen 225 and it makes the instrument cluster gauge move a lot.
TPS = 8 when it "should" be zero, at no throttle. What are the typical no throttle and WOT values

If this post gets 7 positive responses, then I will do it. I will take suggestions for what should be in the data set.

Bill

_________________
----------------------------------------------------------------------
06 CRD LTD - Suncoast TC- Shift Kit - Spicer UJ - FRKNLIFT - F37 - Magnaflow - 22.0 City - 24@65MPH - Fumoto F-102 - AUX T Cooler - Tank Lift Pump

Sure, I'll do some data collection. Not sure we need a database, just "normal" readings for each of the gauges would be cool.

Just cleaned my MAP sensor again when I did my oil change. Notice that the boost readings went as high as 32.4 after the cleaning. Before I rarely got it over 31.x. MAP sensor really wasn't that dirty, nothing compared to the really fouled condition it was in 6 months ago.

_________________
2005 CRD "Ol' Blue"
Red Ryder carbine-action, two hundred shot range model air rifle with a compass in the stock and this thing which tells time.
My build page- RL Komodo Rear and TJM Front Bumper, armored, lifted, JBA Steel D30, 4.10s and ARB air lockers.