| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Database of scanner measurement values for CRD. Interested? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=24061 |
Page 1 of 1 |
| Author: | Bill.Barg [ Wed Sep 05, 2007 1:10 am ] |
| Post subject: | Database of scanner measurement values for CRD. Interested? |
I was thinking of starting a "Database" of scanner measurements collected from the folks who have products similar to the Scangauge II I could put together a list of measurments, then y'all could fill in the numbers you get, and post it. I will compile the data with excel over a couple of weeks, then "publish" the database with "averages". Things that I want to get some data on, for instance; MAP as a function of rpm. When should the boost pressure be greatest? Mine drops of after 2200 rpm. Air temperature. With ORM / without. (Normalised with ambient temp) Typical and Max water temps. I have seen 225 and it makes the instrument cluster gauge move a lot. TPS = 8 when it "should" be zero, at no throttle. What are the typical no throttle and WOT values If this post gets 7 positive responses, then I will do it. I will take suggestions for what should be in the data set. Bill |
|
| Author: | bugnout [ Wed Sep 05, 2007 10:22 am ] |
| Post subject: | |
Sure, I'll do some data collection. Not sure we need a database, just "normal" readings for each of the gauges would be cool. Just cleaned my MAP sensor again when I did my oil change. Notice that the boost readings went as high as 32.4 after the cleaning. Before I rarely got it over 31.x. MAP sensor really wasn't that dirty, nothing compared to the really fouled condition it was in 6 months ago. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|