| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Getting a new turbo http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=24796 |
Page 1 of 1 |
| Author: | Saber [ Thu Sep 27, 2007 7:54 pm ] |
| Post subject: | Getting a new turbo |
CRD lost power on Monday. Hooked it up to my laptop scanner, and had low boost pressure code. Pulled the turbo to intercooler hose off and it was cracked, and swimming in oil. Took it to the dealer they say the seals are bad in the turbo, and going to replace with a new one. Glad I still have 20k in the power train warranty wonder if I'll have to pay for new boost hoses ? |
|
| Author: | UFO [ Thu Sep 27, 2007 8:08 pm ] |
| Post subject: | Re: Getting a new turbo |
Saber wrote: Glad I still have 20k in the power train warranty If you want good ones....
wonder if I'll have to pay for new boost hoses ? |
|
| Author: | Cowcatcher [ Thu Sep 27, 2007 8:13 pm ] |
| Post subject: | |
I had one replaced under warranty last Friday! |
|
| Author: | Saber [ Thu Sep 27, 2007 8:21 pm ] |
| Post subject: | Re: Getting a new turbo |
UFO wrote: Saber wrote: Glad I still have 20k in the power train warranty If you want good ones....wonder if I'll have to pay for new boost hoses ? are there any after market hoses available? |
|
| Author: | Sir Sam [ Thu Sep 27, 2007 8:38 pm ] |
| Post subject: | Re: Getting a new turbo |
Saber wrote: UFO wrote: Saber wrote: Glad I still have 20k in the power train warranty If you want good ones....wonder if I'll have to pay for new boost hoses ? are there any after market hoses available? There might be soon: http://lostjeeps.com/forum/phpBB3/viewtopic.php?t=23861 |
|
| Author: | Saber [ Thu Sep 27, 2007 8:44 pm ] |
| Post subject: | |
Hope the new OEM ones last till the Silicon come out anyone try makeing some hard pipes out of PVC yet? |
|
| Author: | Sir Sam [ Thu Sep 27, 2007 8:52 pm ] |
| Post subject: | |
Saber wrote: Hope the new OEM ones last till the Silicon come out
anyone try makeing some hard pipes out of PVC yet? you could if you REALLY needed a temp solution, there are better metal long term solutions, but the samco route should be the best route for us all. |
|
| Author: | Saber [ Thu Sep 27, 2007 9:00 pm ] |
| Post subject: | |
Sir Sam wrote: Saber wrote: Hope the new OEM ones last till the Silicon come out anyone try makeing some hard pipes out of PVC yet? you could if you REALLY needed a temp solution, there are better metal long term solutions, but the samco route should be the best route for us all. If I still had my tig I would fab some up out of SS Keeping finger crossed for the samco |
|
| Author: | Sir Sam [ Thu Sep 27, 2007 9:07 pm ] |
| Post subject: | |
Saber wrote: Sir Sam wrote: Saber wrote: Hope the new OEM ones last till the Silicon come out anyone try makeing some hard pipes out of PVC yet? you could if you REALLY needed a temp solution, there are better metal long term solutions, but the samco route should be the best route for us all. If I still had my tig I would fab some up out of SS Keeping finger crossed for the samco Ill see your tig and raise you an ARC welder! 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|