My understanding is the gasser harness is a direct replacement? Be sure and install the additional ground wire under the back seat next to the harness plug that does not go through the connector...
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=23099&start=120On my 05, I simply added the two additional wires to the OEM harness, so I have no experience on replacing the the gasser harness.
From one of gmctd's earlier posts:The rear cabin-harness connector has 8 or so wires (12 for '06) -
Brn, Brn\Blu for fuel gauge sender
DGrn\DBlu and DBlu for VSS (Violet for '06)
blue\orn or green\red for fuel pump - pump ground does not go thru the connector, but attaches to the special ground bracket on the floor pan with a self-tapping screw - that's the square nut without threads, 'bout half-way between the connector and the door
2 for optional (DGrn\Yel, MGrn\Brn andDkGrn\Vio, DkGrn\DkBlu for L&R rw VSS in '06)
The rear harness connector has four wires -
Brown, Brn\Blu for the fuel sender
DkGrn\DBlu and DBlu for the VSS in the differential housing
Black ground is separate, external to the connector
____________
Good luck!
_________________
Supporting Vendor and Moderator of LOST05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount98 Dodge Cummins 24 Valve