Is there a plug in position for a trailer brake controller plug in the CRD trailer buss or will I have to connect the controller to a fuse in the fuse panel?

If you have the factory trailer hitch option you will find a bundle of wires behind a plastic panel under the drivers side dassh that is taped shut. Behind this you will find a wire marked "Brakes" that runs to you wire connector to the rear and it wired to the correct pin on the plug. Some have located a "Trailer" fuse in the panel but nobody knew exactly what that meant. I believe they used it for their brakes. I followed the brake manufacture's guidlines and ran directly to the battery with a 20 amp brakeer on the positive side.

_________________
Dave

'06 CRD Limited, Lt. Khaki, MOPAR Slush Mats/Skids, DrawTite Front Hitch, Mag Lite, Yakima Bars, Thule Bike Rack, Fumoto, ORM, 245/70 Revo 2

Wish list: Lift, Boulder Bars, Something Bigger in the Front and Back, More Lights